answersLogoWhite

0

use a keeper ring, it looks like a washer only with teeth on the inside the id of the ring will be the od of the pin. slip ring on and insert pin if done correctly the pin stays put. use a ring on top and bottom

User Avatar

Wiki User

20y ago

What else can I help you with?

Related Questions

What is the name for pin that slides into a door hinge?

The pin that slides into a door hinge is called a hinge pin. It is usually removable to allow for door removal or adjustment.


How do you replace a door hinge pin in a 1997 grand marquis?

To replace the door hinge pins on a 1997 Jimmy you will need to open the door up. Place two jack stands on the front and back of the door's length at the bottom portion of the door for support. Remove the damaged hinge pin with the proper socket. Place the new hinge pin in place and secure it.


1986 GMC Vandura rear door hinge pin is broken?

If the rear door hinge pin on your 1986 GMC Vandura is broken, you will need to replace it to restore proper door function. Start by removing the door from the hinges, then carefully extract the broken pin. You can purchase a replacement hinge pin at an auto parts store or online. Finally, reinstall the door with the new pin, ensuring it's aligned correctly for smooth operation.


How to remove 1991 camaro door hinge pin?

Open the door, support it with a jack, remove the hinge spring. To remove the pin, you should have to remove a retaining clip at the head of the pin and then tap it out with a hammer. The upper hinge has two bolt secured bushings. Unthread the bolts, tap them out with a hammer and pull out the bushings. Make sure the door is held secure, as it will be free floating at this point.


How do you remove the front door hinge pins on a 1995 Jeep Grand Cherokee?

Door pin/bushing replacement guide: http://www.digitalrevo.com/jeep/doorpins.html


What is a door hinge pin?

A hinge pin is a pin that holds together two hinge plates, one of which is fastened to the door and the other is fastened to the door jamb. There are usually two or three hinge assemblies used on each door, one near the top, one near the bottom, and sometimes one at the middle.


What is the purpose of the spring hinge tension pin in a door hinge mechanism?

The purpose of the spring hinge tension pin in a door hinge mechanism is to provide tension and resistance, allowing the door to close properly and stay in place when opened or closed.


What are the different types of door hinge pins available in the market?

There are three main types of door hinge pins available in the market: removable hinge pins, fixed hinge pins, and loose pin hinges. Removable hinge pins can be easily taken out for door removal or maintenance. Fixed hinge pins are permanently attached to the hinge and cannot be removed. Loose pin hinges have a pin that can be easily removed for door installation or removal.


How do you replace door hinge pins on a 1993 Mercury Cougar?

Hold the end of the door with a jack, grind the head from the old pin, knock out the old pin, remove the door half of the hinge, drill out the hinge to accept the new bushings, install the new bushings, re-bolt the hinge to the door, finally, insert the new pin and install the C clip


How do you replace door hinge pin and bushing on Crown Victoria?

The pin will probably have to have the bottom end that is flared out cut off or drilled out. The pin can then be tapped out. This is easier if the hinge has been removed but then the door will have to be blocked up into place while the hinge is off.


How do you change door hindge pins on 1994 thunderbird?

you buy a hinge pin replacement kit made for the f-150 truck and use it on your bad hinge... worked like a champ on my 95 cougar


How do you replace a hinge pin bushing on a 1997 Jeep Grand Cherokee front door?

You can purchase replacement hinge pin and bushing kits from Napa, O'Reilly, Etc. Part numbers are: Dorman 38422 NAPA 675-1594 They are about $5.99 per pin, (2) required per door. Then you have to install as listed below on digitalrevo. There is a hinge kit available from dealers- my understanding is that it's pretty expensive, and replaces the complete hinge, so it requires welding a new hinge to the door. My door was rusted out at the bottom anyway, so I bought a complete replacement from a salvage shop. Here's a guide to replace the door pins and bushings. http://www.digitalrevo.com/jeep/doorpins.html Digitalrevo is not an active website as of 12/24/07