To set the timing on a 1990 Olds Calais with a 2.3L Quad 4 engine, first ensure the engine is at TDC (top dead center) for cylinder one on the compression stroke. Then, locate the timing mark on the crankshaft pulley and the timing tab on the engine. Use a timing light to check the timing; if adjustments are needed, loosen the distributor hold-down bolt and rotate the distributor until the timing light indicates the desired timing mark. Finally, retighten the distributor bolt and recheck the timing to ensure it remains in the correct position.
In the computer.
Look in front lower of engine behind radiator
he oil filter is towards the front of the engine near the oil pan
The Oldsmobile Calais, also known as the Cutlass Calais, was produced by General Motors from 1985 to 1991. In 1987, the Quad 4 engine was developed and the 1988 Calais was fitted with it. All?æof the Quad 4 14 engine types of the 2.3 liter version are interchangeable on the 1988 Calais.
In the computer.
chain
You have to remove the intake manifold and be care full of the crank sensor
Timing chain diagram or how to set it
The timing is ground in the crankshaft and not adjustable.
olds cutlass calias bolt removal. you must remove the air box, the radiator cooling fan and anything else that is in your way from accessing the alternator from the top, front of the car. a longer extension on a 3/8 drive ratchet and the proper size socket,13mm or 15mm should remove this bolt.
Well I would say the max is around 400cc for 13 year olds. I am 16 and my first Quad was a 700 when I was 14:D
Will not bolt up and is not strong enough for the 3800.