Want this question answered?
You need to take the intake manifold off and radiator
you have to take the intake manifold off which is a monster, and just pull the plugs and take the 6 plugs out
you need to take the intake maniflod off, and the 2 screws on the back of the manifold. total time 2.5 hours, replace intake gasket or reseal it...
The only way to get to the intake manifold gasket is to take the head off. I'm working on it right now and so far that is all i can say
According to Chilton's, on a V6 you can, but with the V8 you have to take off the intake manifold and get inside...
The starter is located under the intake manifold, and you will have to remove the intake manifold to get to it. Do not forget to buy a intake gasket before you take it off, because they always fall apart when you take the intake manifold off.
on a 2001, with the 3.3, the knock sensor is under the water crossover pipes, which are under the intake manifold. Pain to change. Take off plenum, intake manifold and there it is, on top of the block between the heads.
how to replace intake manifold for 1994 ford falcon ED
Remove the intake manifold and take it to a welding shop that works with aluminum. Let them determine if it can be saved or not.
The intake manifold is underneath the plastic silver cover held down by four nuts. Take it off and you'll find the intake manifold - also plastic. Even more unusual, the starter is underneath the intake manifold!
It depends on what you have to remove to get the intake manifold off. Once the intake manifold is off it will take about an hour.
under the intake manifold