0
To test the multifunction switch control on a 1995 Chevy S10, start by ensuring the vehicle is off and disconnect the battery. Remove the steering column cover to access the switch, then use a multimeter to check continuity across the different terminals while operating the various functions (turn signals, wipers, etc.). Compare the readings to the specifications in the service manual; no continuity where it should be indicates a faulty switch. Reassemble everything once testing is complete.
What else can I help you with?
Where is the multi function switch on a 2002 Dodge Dakota?
"Multi-function switch" usually refers to the turn signal/wiper control module which is located on the steering column at the base of the signal/wiper control lever.
Were is the wiper delay switch on a 99 ford escort se located?
It's on the wiper control switch on the multi-function switch.
Where is the location of the multi-function switch on a 1997 thunder bird steering column?
I am assuming the "multi-function" switch is the TURN SIGNAL/HI-LO BEAM/WIPER CONTROL SWITCH. It is located on the left side of the steering column.
Why don't 2001 Chevy blazer brake lights work?
check the multi function switch. I hava a 96 Chevy Monte Carlo and I had the same problem . I changed the multi function switch and the brakes lights now work. the rear brake lights run thru the switch on the turn signal circuit. try it and see.
What is a multi function switch on a 1995 Monte Carlo?
The term "multi-function switch" on a vehicle usually refers to the stick (or sticks) on the steering column that controls turn signals, wipers, cruise control, etc.
What is multi-service switch?
what is the function of the switch ? and what does it do ?
Why would a 1990 Chevy s10 signal lights only work when the headlights are off?
a bad multi function switch or the wrong bulbs.gmjim
Where is the multi function switch on 1999 cadillac?
turnsignal/wiper switch
2001 Mercury Grand Marquis Flasher Location?
Internal to multi-function switch. Multi-function switch is mounted with two bolts. This will be a 5 minute repair.
What does the multi switch in a 1996 ford Crown Victoria do?
Your multi function switch is mounted inside your steering column cover The turn signal lever is part of the multi function switch , as is the hazard flasher switch - these are visible outside of the steering column cover Your turn signal lever / multi function switch operates : - turn signals - high beams - flash to pass - windshield wipers - windshield washer
Where is the multi purpose switch 1988 ford ranger?
The multi function switch is inside the steering column , for turn signals etc.
Why do the wipers and windshield washer not work in a 1995 Mercury Sable - Ford Taurus?
2 things the wipers and washers have in common:The fuseThe control switch - on the multi-function switch / turn-signal stalkHopefully it'll be the fuse, but not uncommon for the multi-function switch to go bad too.See "Related Questions" below for more specifics about both
