To wire the starter on a 1972 Pontiac, connect the battery positive terminal to the starter solenoid's larger terminal. Then, attach the smaller terminal to the ignition switch wire, which activates the solenoid when the key is turned. Finally, ensure that the ground wire is securely connected to the starter's mounting point to complete the circuit. Always consult a wiring diagram specific to your model for any additional details or variations.
where do the wires on the starter go on a 1977 pontiac 400
On a 98 Pontiac Sunfire, the red color of wire goes on the terminal marked "B" on the starter. This terminal is located close to the battery of the vehicle.
In order to wire the starter on a Pontiac Sunfire, you will need a jack, jack stand, socket set, and a torque wrench. You will need to make sure to remove the battery cables from the battery.
follow the positive battery wire. you will find a boxy looking this about 8 inches long... this is your starter
two bolts on the starter motor and a plastic bracket covering the starter motor unscrew big wire nut and there is also a small wire to unscrew makesure negative wire to the battery is off
If you follow the positive (red) wire from the battery down into the bowels of the engine compartment, it will go directly to the starter.
Its the yellow one comes from starter engine" p" Erik
where is the starter located on 2005 pontiac sunfire
how do you connect the wire from the alternater to the starter?
The ignition wire in a Nissan 350z is black and red. The starter wire is white/red and the second starter wire is white/green.
The Chevy starter does not have a ground wire, the starter grounds through the starter casing.
How do you replace starter on2.3 cy 1991 pontiac grand am