Replacing a power seat motor in a 2000 Oldsmobile Intrigue can be moderately challenging, especially for those without mechanical experience. It typically involves removing the seat from the vehicle, which requires unbolting it from the floor and disconnecting electrical connectors. Once the seat is out, access to the motor is easier, but it may involve additional disassembly of the seat itself. Overall, with the right tools and some patience, it can be a manageable DIY project.
no there is only one belt
firewall passanger side down low.
To repair the power window on the 1998 Old Intrigue, you will first need to remove the interior door panel to access the window motor, switch, and actuator. You can then determine which part is broken or damaged and replace that part.
how to replace the power steering hose on a 2001 oldsmobile aurora 3.5 liter engine
Try reading Rick Muscoplat's Blog post and his suggestion to replace them with a "Dormanproducts.com regulator. Here's the link to that Blog post: http://free-auto-repair-advice.blogspot.com/2007/10/replace-power-window-motor-regulator.html
Word the question properly. What is an Oldsmobile Royale?
replace 1987 dodge pickup/power window motor
To change the water pump simply remove the bolts from the waterpump, pull it off and replace with new. The power steering pump will need to be loosened and moved aside to remove one bolt. Clean old gasket from engine block and replace with new gasket and replace with new waterpump.
We have a 1998 Intrigue and I can tell you why we were losing power and it was getting kinda' scary, although it would start right up again after I pulled over, put it in park and restarted it. We had an oil leak and it was dripping on to a sensor.
you don't you replace it
alternator could be going out..
power window motor removal 93 sunbird