The cost to replace a Power Steering pump on an Oldsmobile Intrigue typically ranges from $300 to $600, depending on labor rates and whether you choose an aftermarket or original equipment manufacturer (OEM) part. Labor costs can vary significantly based on your location and the specific repair shop. It's advisable to get quotes from a few local mechanics for a more accurate estimate. Additionally, if there are any other issues with the power steering system, the total cost may increase.
no there is only one belt
how to replace the power steering hose on a 2001 oldsmobile aurora 3.5 liter engine
firewall passanger side down low.
Word the question properly. What is an Oldsmobile Royale?
a wrench and a 12 pack
For a 1998 Oldsmobile Intrigue, it's recommended to use a power steering fluid that meets the specifications of GM's Dexron III or Dexron VI. Brands such as ACDelco, Valvoline, or Prestone offer suitable options for this application. Always check the owner's manual for any specific recommendations or requirements related to fluid type.
Plugged or stuck valve in the power steering unit would be my guess. The power steering pump (the thing you add fluid to) is probably OK if you can still turn right as usual.
Behind the back side of the engine on the passenger side, about a foot down from the top. It's not easy to get to.
To remove the power steering pump from a 2002 Oldsmobile Intrigue, first, disconnect the negative battery cable for safety. Next, remove the drive belt by loosening the tensioner, then disconnect the power steering hoses. Unbolt the pump from its mounting bracket and carefully lift it out of the engine bay. Finally, make sure to seal any open lines to prevent contamination before installing a new pump.
The cost s a 1999 Oldsmobile Silhouette power steering pump costs between $80 and $220. This is price changes based on the store and brand of the part.
To replace the power steering line on a 1996 Oldsmobile Ciera, start by safely lifting and securing the vehicle. Drain the power steering fluid, then locate the high-pressure and return lines connected to the power steering pump and the steering gear. Use a wrench to disconnect the old lines, and then install the new lines, ensuring all connections are tight. Finally, refill the power steering fluid and check for leaks before testing the system.
To change the water pump simply remove the bolts from the waterpump, pull it off and replace with new. The power steering pump will need to be loosened and moved aside to remove one bolt. Clean old gasket from engine block and replace with new gasket and replace with new waterpump.