0
What else can I help you with?
Where is the alternator on a 97 grand prix?
Right next to the supercharger
Change 2004 grand prix supercharger pulley?
You will need a supercharger pulley tool to do the job right so you dont risk damaging the shaft of the blower, companies such as zzperformance or intense racing have them available for purchase or just a one time rental http://www.zzperformance.com http://www.intense-racing.com
You like to know where to put supercharge oil with your regular oil or is there a oil res right on your supercharger?
The question is about my Buick Regal GS 2000 Supercharger oil Information
Where is the oil filter on a 2006 super charged cobalt ss?
right under the supercharger (on the right side), it's a cartridge filter.
How do you get to the rear spark plugs on a 1995 Buick Riviera 3.8L SFI supercharger?
from underneath the car you can get right to them
How to fix a supercharger with rattling in snout of supercharger is there a diagram?
If your supercharger is an Eaton type supercharger and it is making noise that is an early indication that the supercharger might need a rebuild. A lot of times the noise is actually coming from a little coupler that is located in the inside of the supercharger. This coupler has 6 holes in it and over time these rounded holes will wear out and become an oval shape. Once it becomes oval shape the supercharger will start to make a rattle sound. If left untreated the rattle will lead to the bearings going bad and then the seals. You will then need to get a complete rebuilt done on the supercharger. The coupler is easy to replace. You basically have to take the supercharger noise off with the 6 bolts that holds it and then once the two ends pull a part the coupler will be sitting right there. Just slide the coupler off of the pins and replace it. Then slide the two ends together and bolt it back up. You will also need to refill the supercharger with oil.
Where is the cam shaft sensor on a 98 Buick Riviera supercharger?
RIGHT SIDE OF ENGINE NEAR CRANK PULLY
Leak on a 2001 grandprix gtp right at the end of the supercharger leaking from the bolt that connects the pulley to the supercharger what is the problem?
That is a major sign that the supercharger is going bad and will need a rebuild. Basically the seal is leaking from the front nose cone. The seal usually leaks when the bearings have gone bad. The two best options will to replace the front nose cone, or get a rebuilt supercharger. Once the oil starts to leak the bearings will have no oil and it will soon fail on you.
Do they make a bolt on supercharger for a dodge neon?
There have been prototypes but nothing seems to be in the market right now. There have been prototypes but nothing seems to be in the market right now.
1995 jag Loud noise coming from supercharger and supercharger has no oil?
This is a very bad sign. If the supercharger has no oil it is very possible that you have a leak from the nose piece and because of the leak your bearings are running dry. You need to get this fixed right away for if you do damage to the core it will end up costing you several hundred dollars more. The best thing for you to do is to contact rebuilders of these products.
How do I repair Buick supercharger coupler?
This is pretty simple. Basically you need to take off the belt and drain the oil out of the supercharger. From there you have to loosen the 6 bolts that hook up the front of the supercharger to the back. (If you do not drain the oil, the oil will actually leak out once you take these bolts off, which can be messy, so that is why you want to drain the oil first.) Then you just have to pull the nose away from the main body. And take out the coupler, which is located right on pins of the supercharger. From there just slide the new coupler on. And then apply gasket maker to both ends of the supercharger main body and the nose. Put back on the 6 bolts, and hook up all the lines and belts. Fill up the supercharger with "GM Supercharger Oil" and you are done. Taking your time, it should take around 1-2 hours.
Where are the knocks sensors on a 1996 tacoma ext cab 4X4 V6?
the knock sensors (2) are right in front of your intake into the engine block, or right underneath the supercharger in the s/c'd model
