Divide the coulombs by the amperes. The answer will be in seconds. The resistance is irrelevant in this problem.
72 coulombs in 24 seconds is 3 amperes.One ampere is one coulomb per second.
250 mA = 0.25 Ampere = 0.25 coulomb per second.(0.25 coulomb/second) x (60 sec/minute) x (30 minutes) = 450 coulombs
A flow of 7400 coulombs in 85 seconds represents a current of 87 amperes. One ampere is one coulomb per second, so divide 7400 by 85.
The unit quantity of electricity is the Coulomb. The rate of electricity flow in coulombs per second is the Ampere, sometimes shortened to Amp. Note: current doesn't flow, instead current itself is a flow rate (flow of coulombs of charge per second.) When coulombs are flowing, the flow rate is measured in amperes.
First of all, current goes straight through the resistor, not across it.If the potential difference between the ends of the resistor is 20 volts,and its resistance is 10,000 ohms, then the current through it isI = E/R = 20/10,000 = 0.002 ampere = 2 milliamperes
hinders flow of current
3 ampere
1 Ampere = 1 Coulomb/sec (225 Coulomb) / (5 sec) = 45 Coulomb/sec = 45 Amp.
A circuit with a 2 ohm resistor and a 4 ohm resistor in series with a 12 volt battery will have 2 amps flowing through each resistor. The current is the same in each resistor because they are in series, and a series circuit has constant current throughout.
If a battery sends a current of 10A through a circuit for one hour how many coulombs will flow through the circuit?
Electron current flow is measured in coulombs per second, which is known as amperes. A coulomb is about 6.242 × 1018 electrons.
The unit quantity of electricity is the Coulomb. The rate of electricity flow in coulombs per second is the Ampere, sometimes shortened to Amp. Note: current doesn't flow, instead current itself is a flow rate (flow of coulombs of charge per second.) When coulombs are flowing, the flow rate is measured in amperes.