0
What else can I help you with?
How does pulley size on a supercharger change the boost?
Using a larger pulley on a supercharger will reduce the boost pressure because the supercharger will not be spinning as fast. Conversely, using a smaller pulley will increase the boost pressure as the supercharger will spin faster. It is important to carefully select the pulley size to achieve the desired boost level without overworking the engine.
What is the stock supercharger pulley size for a 2001 Pontiac Grand Prix GTP?
3.8
What would cause a supercharger to over boost?
A supercharger is controlled by its pulley size. The smaller the supercharger drive pulley is, the higher in boost pressure you will see. Now if you go with a larger crank pulley, this too will cause you to see more boost. So, in all honestly, the only way to really over boost your supercharger is when you mess around with the pulleys.
What is the stock supercharger pulley size for a 1998 Pontiac Grand Prix GTP?
3.8" inches
What size is the stock supercharger pulley on a 1999 grand prix gtp?
The stock supercharger pulley on a 1999 Pontiac Grand Prix GTP is typically 3.8 inches in diameter. This pulley is designed to provide the optimal boost for the supercharged 3.8L V6 engine, balancing performance and reliability. Upgrading or changing the pulley size can affect the boost levels and overall engine performance.
How do you remove Toyota Previa supercharger pulley?
To remove the supercharger pulley from a Toyota Previa, first, ensure the engine is cool and disconnect the battery. Next, remove the supercharger assembly, which may involve detaching the intake manifold and other components. Use a pulley puller tool to carefully extract the pulley from the supercharger shaft. Finally, inspect the pulley and surrounding components for wear or damage before reassembly.
How do you take a supercharger pulley out?
This all depends on what type of supercharger it is. If you have an Eaton supercharger it is possible that it might be a pressed on pulley. If this is the case then you will need a pulley puller. If the supercharger is a Vortech, Paxton, or ProCharger they all use key ways. So all you need to do is take the bolt off and the pulley might come off. Some times the pulley will not slide off so a pulley puller will work. Or you can heat up the shaft which will cause the pulley to expand and it will then slide right off. DO NOT use a screw driver or any force to pry it off. This can cause damage to the bearings.
How do you measure pully size?
There are four steps on how to measure pulley size. One of the step-by-step instructions is to diameter of driven pulley) times (revolutions of driven pulley) divided by (revolutions of driven pulley) equals (diameter of driver pulley).
Can you intercool a neuspeed supercharger?
no you cannot intercool a neuspeed supercharger, a supercharger runs on a pulley not a pipe there is a way to cool them down but its pointless unless you have enough money to do so.
Is their a supercharger for a Lincoln LS 2000?
Yes! Thomas Knight at boosthead.com makes a supercharger for the LS. It's a real pulley driven unit.
How do you disable a supercharger on a 04 Pontiac grand prix?
To disable the supercharger on a 2004 Pontiac Grand Prix, you can remove the supercharger belt from the supercharger pulley. This involves locating the tensioner pulley, releasing the tension, and sliding the belt off. Additionally, you can disconnect the supercharger's electrical connector to prevent it from engaging. Keep in mind that doing this may affect the vehicle's performance and is generally not recommended unless for maintenance or repair purposes.
How do you remove a supercharger pulley in a gtp?
Go to www.zzperformance.com and you will be able to rent a pulley puller do not use a regular pulley puller they. It is about 30 bucks to rent. It will take about an hour to do
