0
Using a larger pulley on a supercharger will reduce the boost pressure because the supercharger will not be spinning as fast. Conversely, using a smaller pulley will increase the boost pressure as the supercharger will spin faster. It is important to carefully select the pulley size to achieve the desired boost level without overworking the engine.
What else can I help you with?
Does the size of the pulley matter?
Yes, the size of the pulley does matter as it can affect the speed and torque of the system. A smaller pulley will result in higher speed but lower torque, while a larger pulley will provide lower speed but higher torque. The size of the pulley also influences the belt or chain compatibility and tension in the system.
Which machine changes the direction of force needed to do a task without changing the size of force needed?
A pulley can do that.
How do you measure pully size?
There are four steps on how to measure pulley size. One of the step-by-step instructions is to diameter of driven pulley) times (revolutions of driven pulley) divided by (revolutions of driven pulley) equals (diameter of driver pulley).
What is the practical use of a pulley that does not change the size of the input force?
A pulley that does not change the size of the input force can still be useful in redirecting the force's direction. This can be helpful in applications where you need to change the direction of the force to make it more convenient for a particular task or to maneuver around obstacles. Additionally, pulleys can be used to maintain tension in a system or to distribute the force evenly across multiple pulleys.
How does the size of the pulley effect the torque?
The size of the pulley directly affects the torque required to turn it. A larger pulley will require less force to turn because the torque is spread out over a larger radius, while a smaller pulley will require more force to turn due to the shorter distance from the center where the force is applied.
What would cause a supercharger to over boost?
A supercharger is controlled by its pulley size. The smaller the supercharger drive pulley is, the higher in boost pressure you will see. Now if you go with a larger crank pulley, this too will cause you to see more boost. So, in all honestly, the only way to really over boost your supercharger is when you mess around with the pulleys.
What is the stock supercharger pulley size for a 2001 Pontiac Grand Prix GTP?
3.8
What is the stock supercharger pulley size for a 1998 Pontiac Grand Prix GTP?
3.8" inches
How do you replace Buick supercharger pulley?
These are pressed on pulleys so it is highly advised not to change out the pulley. Your safest bet is to purchase a whole nose cone that already has the pulley size that is needed. We have seen way too many nose drives ruin because people are attempting to use a pulley puller to take it off. Once it is off, you also need to repress it on.
How can you get more power out of a supercharger?
There are a couple of ways. Changing the pulley size to a smaller supercharger pulley will increase the speed of the supercharger, giving you more boost. You can also go with a larger crank pulley and it will do the same thing. Please keep in mind that when you do this you are adding more air into the engine so you will need to add more fuel. Getting it tuned afterwards will be a great idea. You can also do a thing called "S Porting." This is basically porting out the supercharger and slightly modifing it so that the air flows smoother. Also you can just get it custom tuned. By putting your car on a dyno and having them adjust the air/fuel mixture and timing curves it will result in better performance and more HP Thank you, From www.SuperchargersOnline.com
How much horsepower can a supercharger produce?
A lot! This all depends on the type and size of the supercharger. At boost levels of 7psi you can expect around a 40-45% increase in HP. At 15psi you can expect around 100% increase in HP. HP really depends on boost levels and existing engine HP.
How do you a 97 Pontiac gtp go faster?
the easiest and cheapest way is to drop the size of the supercharger pulley. but remember you have to do "supporting mods" so that you dont hurt your engine due to increased boost. Examples are exhaust mods, CAI, tune, colder plugs, lower thermostat, etc. The stock size is 3.8. you could go to a 3.6 without any mods. will give you aprox. 2 more lbs. of boost and 10-20 hp. any size smaller than that you will have to have supporting mods.
The cooler you have has a 14inch pully if you change it to a 12 inch pulley will it blow harder?
If you decrease the size of the driven pulley the fan will turn faster. You can achieve the same effect by increasing the size of the drive pulley.
How much does a stock size e supercharger add to your bhp on a stock normal car?
depending on the size of the supercharger.. 30% to 40%
Is there a supercharger made for a 2006 Chevy 4.3L?
wynjammer.com Al Martin has a patented mono cog design supercharger in kit form. It's for the full-size gm trucks, and appears to be one of the best out there for easy bolt on grunt. ( 60 - 80 extra ponies at 6 lbs. boost! ) However... Installing a supercharger on your truck may void the last year of your powertrain warranty.
Is super charge faster than turbo charge?
Roots or screw supercharger... spooling Abosultely YES. centrifugal like paxton,vortech, procharger, rotex it "spooling" depends... A supercharger is directly driven from the engine, and therefore delivers boost all the way through the rev range(roots or screw supercharger), improving bottom-end response, Centrifugal can give more boost in first gear than a turbo in first gear from a stop) at the expense of losing a few horsepower because of the load on the engine of the supercharger. A turbocharger uses exhaust gasses to spin up a turbine, which then drives an impeller, to compress incoming air, thus increasing horsepower. However, turbochargers are not very responsive at low RPMs, "taking sometime" to 'spin up', (really depends on the size of the turbo/turboes) this delay in speed, causes so-called 'turbo lag', where there is a delay getting the boost from the time you floor it, until u get boost. So, a supercharger may make a car 'quicker' from an idle start, because of its continuous boost(roots/screw supercharger), a turbocharger is better when it 'catches up' because it doesn't rob as much horsepower from the engine.
Can you change snowblower pulley size?
It depends on the snowblower, belt type and what you arer trying to achieve by making the change. The replacement pulley(s) will have to be the same shaft id as the original to start. Next make sure that there is room inside the snowblower for the new pulley. Thirdly the belt may have to change depending on the pulley size that you choose. There are many different pulley types and sizes available. Be aware of the changes that are made because they can decrease the snow throwing ability and also affect the drive speed and vice versa.
