0
To replace the body control module (BCM) in a Chrysler LeBaron convertible, first disconnect the negative battery terminal to ensure safety. Locate the BCM, typically found under the dashboard or near the steering column. Remove any covering panels, disconnect the wiring harnesses, and unbolt the module from its mounting bracket. Install the new BCM by reversing the removal steps, reconnect the wiring, and reattach any panels before reconnecting the battery.
What else can I help you with?
Where is fuel pump located on Chrysler lebaron convertible?
It is located in the Fuel Tank which means the Tank will need to be dropped in order to replace the Pump.
How do you replace a convertible top on a 1993 LeBaron?
Take it to a professional. This is not a DIY job.
How do you change the transmission filter on a 1995 Chrysler LeBaron convertible?
To change the transmission filter on a 1995 Chrysler LeBaron convertible, start by draining the transmission fluid by removing the transmission pan. Once the pan is off, you'll see the filter; unbolt and remove it. Replace it with a new filter, ensuring any gaskets or seals are properly positioned. Reattach the pan, refill the transmission with fluid, and check for leaks.
Where is the thermostat for a 94 Chrysler Lebaron convertible located?
Follow the hose from the top of the radiator back towards the engine, where it connects is the thermostat housing, this can be removed by taking out the 2 bolts. - remember to replace the gasket!
How long would it take approximately to replace the timing chain on a 1997 Chrysler lebaron?
The last Chrysler LeBaron was in 1995. Both engines available that year had timing belts.The last Chrysler LeBaron was in 1995. Both engines available that year had timing belts.
How do you change rear brakes on 1992 Chrysler lebaron convertible?
To change the rear brakes on a 1992 Chrysler LeBaron convertible, first, lift the rear of the vehicle and secure it on jack stands. Remove the wheel and then the brake caliper by unbolting it, allowing it to hang (do not disconnect the brake line). Replace the brake pads and, if necessary, the rotors, then reassemble by reversing the disassembly steps. Finally, pump the brake pedal to ensure proper brake function before lowering the vehicle.
How do you replace 1988 Chrysler LeBaron brakes?
Front or rear.. disc or drum type..??????????
How do you repair the brakes on a 1992 Chrysler lebaron?
be more specific.. replace pads..?? replace hose..?? repair master cylinder..??
How do you adjust a door on a Chrysler LeBaron?
you might need to replace the hinge pins.. or the complete hinge
Dead battery in 1997 Chrysler Sebring convertible?
Charge it, test it, replace it.
When to replace the Timing belt in a 1997 Chrysler Sebring convertible jxi?
100,000 miles
How do you replace the wiper blades on a 1993 Chrysler lebaron?
ffs.. it ain't rocket surgery.. follow the instructions on the box
