under the glove box there is a panel that holds the blower motor...remove the screws...4 i believe....remove the black plastic cover....there are three screws that holds the blower motor in...remove these and then remove the blower motor...unplug the power source and feed wires out of the hole.....reverse to replace the motor
There are similar, but not the same.
There is a fuse under the hood for the blower motor.
Replace it.
No repairing those blower motors, replace it with a new one.
You need to replace the blower motor resistor located near the glove box.
It is under the hood on the passenger side, up over the strut tower in the firewall.
replace the blower motor resistor. it is located on the firewall near the heater hoses.
How to change blower motor on 2000 grand am gt
One hour............
how to change the blower motor
To replace the blower motor in a 2000 Pontiac Grand Am, first disconnect the negative battery cable to ensure safety. Remove the passenger side lower dashboard trim panel for access, then disconnect the wiring harness from the blower motor. Unscrew and remove the old blower motor from its housing, and then install the new motor by reversing the removal steps, ensuring all connections are secure before reassembling the dashboard trim and reconnecting the battery.
It is located on the passenger side firewall in the engine compartment, right next to the strut housing.