0
What else can I help you with?
How do you replace rotors on a 2004 Chevy Tracker?
How do you change the front rotors on a 2004 Chevy tracker
How do you replace front rotors on 97 landcruiser?
To replace the front rotors on a 1997 Land Cruiser, first, lift the vehicle and remove the front wheels. Then, remove the caliper by unbolting it and gently hanging it out of the way. Next, take off the caliper bracket, which will allow you to access the rotors; remove the old rotors and replace them with the new ones. Finally, reassemble everything by reversing the disassembly steps, ensuring to torque the bolts to the manufacturer’s specifications and bleed the brakes if necessary.
Why do brakes pulsate in 97 buick lesabre?
You have warped the brake rotors. Driving fast & hard stopping or riding the brake will cause this when the rotor is hot and you are stopped with heavy pressure on the brake pedal. Replace rotors and pads.
What is the gas mileage for a Geo Tracker?
i have a 97 geo tracker and get 32 miles to the gallon
How do you replace a throwout bearing on a 97 Geo Tracker 2wd?
You need to remove the transmission from the vehicle. Most people would take this to a repair shop.
What makes a 97 tracker have a constant clicking while driving. Just put new rotors and brakes on the front end. While test driving it I heard a bang and it stopped. It started doing it again.?
did you have the cv joints checked?
How do you replace the front rotors on a Toyota Land Cruiser?
how do you replace the front rotors on Toyota Land Cruiser
Does 97 wrangler Sahara have floating front rotors?
Yes.
How do you replace bulb in shift console for 2004 tracker?
how to replace the light bulb on the gear shift on 2004 tracker
How do you replace rear brackets which hold rear reinforcement for soft top on a 97 Geo Tracker?
WHICH ONE'S? THE CORNER OR THE BRACKET ON THE BACK? THE CORNERS USE A PHILLIPS SCREW DRIVER
How do you replace front rotors on a 94 Geo Tracker 4X4?
To replace the front rotors on a 1994 Geo Tracker 4X4, begin by safely lifting the vehicle and removing the front wheels. Next, remove the caliper by unbolting it from the bracket, and hang it securely to avoid stressing the brake line. Afterward, remove the caliper bracket and then the old rotor, which may require some gentle tapping if it's stuck. Install the new rotor, reattach the caliper bracket and caliper, and finally, reinstall the wheels before lowering the vehicle.
How do you replace front rotors on a 2008 Honda accord?
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
