What engine? Ford Contour 2.0L DOHC eng. distributorless ignition are controlled by the main PCM
There is an ignition module on the 99 contour 2.0 with automatic transmission. It is shown in the schematics for this model.
under the glove box where the firewall meets foot well
To replace the ignition module on a 1999 GMC Suburban, first disconnect the negative battery cable to ensure safety. Remove the distributor cap and rotor to access the ignition module, which is typically mounted on the side of the distributor. Disconnect the electrical connectors and unbolt the module from the distributor. Finally, install the new module, reassemble the distributor, and reconnect the battery.
The engine computer is the ignition module.
The 1999 Chevy S 10 pickup truck ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
what would it could to replace time belt on a Ford Contour 1999?
how to replace ignition lock for 1999 vw beetle
Right under the ignition cap.
you cant you have to get a bypass module.
Inside the distributor
Pull the cover off the air intake box, unclip the two wires from the old module, remove screws. Screw in new module and replace wores and box. job done
The Ignition control module is mounted under the hood. It is on the fire wall right beside the hood strut,
It is part of the engine computer.