remove antanna
Replace the power antenna assembly.
how do I replace a power antenna on my jeep Cherokee 1992
how do you replace power antenna on 1988 deville
To replace the power antenna on an Infiniti I30, first, disconnect the negative battery terminal to ensure safety. Remove the interior trim panel to access the antenna assembly, then disconnect any electrical connectors and unscrew the antenna from its mounting location. Install the new antenna by reversing the removal process, ensuring all connections are secure, and finally reconnect the battery. Test the antenna to confirm it operates correctly.
To replace the power antenna on a 1998 Cadillac DeVille, first, disconnect the negative battery cable. Then, remove the interior trim panel to access the antenna assembly, usually located in the rear quarter panel. Disconnect the electrical connector and antenna cable, then unscrew the antenna from its mounting bracket. Install the new antenna by reversing the steps: secure it in place, connect the electrical and antenna cables, and reattach the trim panel before reconnecting the battery.
To replace the power antenna in a 1991 Chevrolet Caprice, start by disconnecting the negative battery terminal to ensure safety. Remove the interior trim panel adjacent to the antenna, then unscrew the old antenna from its mounting location. Disconnect the wiring harness and remove the antenna assembly from the vehicle. Install the new antenna by reversing the process, connecting the wiring harness, securing it in place, and reattaching the trim panel before reconnecting the battery.
You dont, you replace them.
If the antenna is in the up position, you have 2 options, replace the entire assembly, or unplug it. In the trunk under the antenna, you will find a set of 3 wires going into a relay. Unplug those, and the motor will turn off.
No
Remove the wiring harness from the bottom of your 1987 Chevy Corvette power antenna. Remove the power antenna retaining nuts. Reverse the process to install your new power antenna.
I removed the entire power antenna assembly and could not find any way possible to separate the mast from the motor assembly. Odd, since Mitsubishi sold me an antenna mast.
you dont