there should be two small squered buttons under the clock that have (H) for hour and (M) for minute
no
what is the speaker sizes in my 93 chey truck
Push the set button and with the set light on, press either the scan or seek buttons to change the hours and minutes. GoodluckJoe
Borrowed from silverado answer: Push the set button and with the set light on, press either the scan or seek buttons to change...
You hold down the up and down buttons to the right of audio button
Check the fuses Should have 2 fuses for radio/clock one for radio and a separate one for the memory circuits
If its like my '90, power off the radio so that the time displays. Then, hit Set. Then the Seek/Scan buttons will change the hours and minutes. When you are finished, hit Set again to get out of Clock Setting mode.
To set the clock in a 2006 Chevy Silverado, first, turn the ignition to the "On" or "Run" position without starting the engine. Then, press and hold the "HR" (hour) button until the hour digit begins to flash, and use the "HR" button to adjust the hour. Next, press the "MIN" (minute) button until the minute digit flashes, and use the "MIN" button to set the minutes. Once set, the clock will automatically save the changes when you stop pressing the buttons.
have you tried turning off the radio and then press the set button then press the scan (up, dn) for hours then seek (up,dn) for minutes then press set again
Chey Pribel goes by Chey.
To change the clock setting on a 1993 Chevy Silverado, first, turn the ignition to the "On" position without starting the engine. Press and hold the "Hour" button to set the hour, and then press the "Minute" button to adjust the minutes. Release both buttons once you have the correct time set, and the clock will retain the new setting. If your model has a different configuration, consult the owner’s manual for specific instructions.
This information is listed in your owner's manual. Don't have one, then get one. Dealer, salvage yard, e-bay, or a Google search are sources.