answersLogoWhite

0

You need a torx wrench (in the star formation, the exact size is in your owner's manual) and then you just get two pretty strong people to lift it off, easy as pie. Just make sure you get the right soft top for your Jeep. Additional parts may be required. :-) Good luck

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Would a 93 Jeep Wrangler pwr dist box fit a 92 Jeep Wrangler?

Yes. 92 and 93 are the same model years


How do you replace the water pump on a Oldsmobile?

Remove the serpentine belt then remove the water pump bolts and any attached hoses. It would help to know what year, model, or engine size.


How would you remove the stuck doors from a 2000 Jeep Wrangler?

a little WD 40 should do the trick


What would cause oil pressure to drop when idling in 2000 jeep wrangler?

Depending on mileage--could just be a sign of engine wear Remove oil sending unit and replace with mechanical gauge to determine actual pressure


Why would the turn signals not work on a 1994 Jeep Wrangler?

More than likely the Flasher Relay is defective. Replace it.


How do you replace the fuel pump?

depends on the make and model.. but most fuel pumps are located inside the fuel tank. So to replace it you would have to drop the tank then remove the fuel pump and fuel filter assembly from the tank.


How do you replace the flasher switch on 2001 Kenworth?

For the turn signals, or the four way flashers? It would help if you gave a model. Kenworths usually require Torx bits (T25, IIRC) to remove the panels the switches run through. You remove the panel its attached to, disconnect the switch from it, unplug the switch, and replace it. You need something more specific, I need a model.


When was the Jeep Wrangler Unlimited first introduced?

In the United States, the Jeep Wrangler Unlimited model was first displayed in 2006. The sport utility vehicles were sold later in that year. The model would win awards including 4x4 of the Decade from Four Wheeler magazine.


Which model of Maruti would soon replace Versa?

Eeco


How much does a Jeep Wrangler weigh?

It depends on the year and model. A 1989 would be about 3200 pounds. A 2017 four door would be over 4100 pounds.


How do you replace interior lights?

The year, make and model would help.


Do you have to remove motor and transmission when changing rear main seal on 1991 jeep wrangler 4.0?

Transmission, yes Motor no, but it would be easier if it was out.