0
Begin by removing the Power Steering pump belt from your 1991 Cadillac power steering pump pulley. Remove the power steering pump pulley retaining bolt. The retaining bolt will be in the center of the pulley.
What else can I help you with?
How do you replace tensioner pulley on 1995 Cadillac Seville sts?
To replace the tensioner pulley on a 1995 Cadillac Seville STS, first, disconnect the negative battery terminal to ensure safety. Then, use a wrench to relieve the tension on the serpentine belt and remove it from the tensioner pulley. Remove the bolts securing the tensioner pulley to the bracket, replace the old pulley with the new one, and reassemble by reversing the steps. Finally, reattach the serpentine belt and reconnect the battery terminal.
How do you change an idler pulley on a 1995 Cadillac Seville sls?
To change the idler pulley on a 1995 Cadillac Seville SLS, first, disconnect the negative battery cable to ensure safety. Remove the serpentine belt by using a wrench to relieve tension on the tensioner pulley. Next, unbolt the idler pulley from its mount using the appropriate socket, and replace it with the new pulley. Finally, reattach the serpentine belt, ensuring proper routing, and reconnect the battery cable.
How do you remove the pulley on the power sterring on a 1987 suburban?
That requires a special puller / Tool to remove the pulley. It is pressed on. Advance auto parts will rent you the tool you need.
How do you change battery in 2003 Cadillac Seville?
To change the battery in the 2003 Cadillac Seville, you will need to first access the battery that is located under the rear passenger seat. Then remove the battery cables and remove the battery.
How do you remove the wood trim from a 1999 Cadillac Seville?
With a flat head screw driver. :-)
How do you remove the tension pulley on the 1993 Seville 4.6L Northstar engine?
Not easily. Get a manual on your car.
How can I remove the sterring pump from 1990 Lincoln Town Car?
remove belt from pump. Disconnect lines. You may be able to get to the mounting bolts through holes in the pulley, if not you will have to remove the pulley with a special tool available for loan at most auto parts stores.
How do you replace a heater core on a 1987 Cadillac Seville?
I need to know how to replace the heater core in a 1987 cadillac seville. I would like to have step by step instructions on the removal and replacemnet of this part. Where it is located and how to remove it
Where is the battery on a 1999 Cadillac Seville?
The battery to a 1999 Cadillac Seville SLS is underneath the backseat of the car. The car manual explains how to remove the rear seat and gain access to the battery. It is much easier then it sounds.
How do you remove the front door panel on a 1992 Cadillac Seville?
I have a 1992 cadillac seville. The window won't go up. The window motor is working. I want to see if the glass window itself is off the track. How do I remove the inside panel of the door to get to the glass window?
How do you change water pump on85 Cadillac Seville?
To change the water pump on an 1985 Cadillac Seville, first disconnect the battery and drain the coolant. Remove the serpentine belt, followed by the water pump pulley and any associated components obstructing access. Unscrew the water pump bolts, remove the old pump, clean the gasket surface, and install the new water pump with a new gasket. Finally, reassemble everything, refill the coolant, and reconnect the battery.
Replace rear turn signal bulb 2002 Cadillac Seville?
remove side inner panel and remove the nuts and assembly will come out
