I have dealt with this problem before at our bodyshop. Basically, a spring inside the latch has broke, and now there is no way to release the latch, even by manually pulling on the release lever at the latch. Prepare to replace the latch, as it is not repairable.
Be prepared to be working inside the car. To make it easier to work, unbolt the seat, and remove from the car. Remove the door panel, and also the door handle. You will have to chisel at the plastic part of the latch, and break it off bit by bit. Eventually you will be able to release the latch.
good luck
it appears everything to repair on this car is pain in the azz!
Buy a chilton's or haynes maintenance manual. They tell you everything. I had to replace my drivers side window motor. Not too hard.
To replace the driver's exterior door handle on a 1996 Toyota Tercel, first, remove the door panel by unscrewing the screws and carefully prying it off. Next, disconnect the linkage and wiring connected to the old handle. Remove the retaining bolts for the door handle and pull it out from the outside. Install the new handle by reversing the steps, ensuring everything is securely fastened and reattach the door panel.
Do not need an answer any more. Mazda dealer replaced the complete seat mechanism for $931. Using a used car seat. It appears that the motors can not be replaced individually.
Get it re-newed.
What about the sun visor...the answer didn't say anything about how to remove and replace the visor
How do you replace the front drivers seat on a 1996 Chevy S10 pick up truck
not positive about this but you may want to check the grounds where they are attached to the body. you may have to replace the wire ends on a clean spot (bare metal) and re-screw them down....
What model?
how do i replace drivers side mirror Nissan maxima 2005
how do i replace the drivers side headlight in a 2003 oldsmobile silhoutte
audi a3 how much replace drivers side window