It could be the switch,power source to the switch, or the motor is burnt up. More than likely the motor is the problem since the driver side get a great deal more use than any other.
yes
Does this car have a safety lockout of the passenger switches? It's probably activated. If it was just one passenger window I would suspect a broken wire, most likely in the rubber bellows between the door and frame.
I would check the switches first then check the window motor for passengers side.
If you can operate the window from the driver's side, then you need to replace the switch on the passenger's side. If neither side works you need to replace both switches. You buy the switches at any auto parts store. They are fairly cheap. The cover on the window-control panel can be easily removed. If there are no screws, just pry it up.
you need to check the switches first. if not that, it is the power window motor .
power window moter is bad.
Replace driver's switch assembly
In a 2000 Jeep Cherokee Sport, if the driver side power window switch works while the other three door switches do not, it may indicate a problem with the individual door switches or their wiring. The driver side switch often acts as a master control, allowing it to bypass issues affecting the other switches. Additionally, there could be a blown fuse or a fault in the wiring harness leading to the passenger door switches. Checking the connections, fuses, and individual switches would help diagnose the issue further.
It is most likely a disconnected or broken wire in or going to the driver's door.
The 1994 Chevrolet Camaro power window relay switch can be found inside of the driver side door. You will need to remove the door panel to access the power window relay switch.
if the windows switches are on the door panel, you may have broken wires between the door and the body.
Go to a MECANAIC...