Yes, it is a very involved project on a car with very little room under the hood.
Having a head gasket replaced on a 2000 Amigo can be replaced but it can be hard depending on if the mechanic has the right instructions. Also, depending on the condition of the head gasket can depend on how hard it is replace the gasket.
replace head, head gasket, and head bolts.
take off the head, replace gasket. reinstall head
To replace the head gasket on a 2006 PT Cruiser, start by disconnecting the battery and draining the engine coolant. Remove the intake and exhaust manifolds, and then detach the cylinder head by loosening the head bolts in the correct sequence. Clean the surfaces, install the new gasket, and reassemble by reversing the disassembly steps, ensuring to torque the head bolts to the specified settings. Finally, refill the coolant, reconnect the battery, and check for leaks before starting the engine.
Remove upper and lower engine intakes. Tie back or label tubes so not to loose reconnections. Once everything is remove the gasket is exposed. Pull gasket replace, then return intakes and labeled tubes.
replace head gasket
Remove head change gasket and replace head, pretty simple.
What is the cost to replace the head gasket on a Mazda MPV?
cost to replace a head gasket
It is not possible to repair the actual head gasket. Repair of a blown head gasket is to replace the gasket.
remove head and replace gasket :)
Head gasket repair on a 2002 PT Cruiser requires extensive time, knowledge and tools. The intake manifold, cam shafts, and cylinder heads must be removed.