answersLogoWhite

0

Answer
There are brands of antifreeze out there that will work in "ANY" car, "ANY" antifreeze...A good parts store will carry it...Don't waste your money at the dealer....



Actually - you want to be careful with what brand you choose. Modern cars have specific requirements, many require long life anti silicon anti boron anti everything low phosphorous, etc. For instance, using non Dexcool in a GM product may void a warranty, likewise using Dexcool in a Toyota may void it also. Using the wrong antifreeze in modern cars can potentially cause consequences (eating up gaskets, etc) and void warranties. Do your homework on the right antifreeze to buy and when in doubt, consult your manual, your dealer and for the few extra bucks it cost, get it from your dealer. Since it sounds like you are servicing it yourself with the $50 - $75 you will save you can easily spend a few extra bucks at the dealer. Adding conditioner is also important when either recommended or required.
Answer
Subaru does recommend a conditioner that I think is put in with the coolant to help prevent a blown head gasket. Look into this if you're doing it yourself.
User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What type radiator coolant is recommended for a 1998 Subaru Outback?

Genuine Subaru Long Life Coolant P/N SOA868V9210.....


Why isn't coolant flowing in the radiator on a 2001 subaru outback when the cap is off and the engine is running?

The question is why do you think it should? Is there an overheating problem with your Outback?


When was Subaru Outback created?

Subaru Outback was created in 1995.


How much coolant does a Subaru Outback hold?

The coolant capacity of a Subaru Outback typically ranges from about 9 to 12 quarts (approximately 8.5 to 11.5 liters), depending on the specific model year and engine type. It's important to consult the owner's manual or a service guide for the exact capacity for your particular vehicle. Proper coolant levels are crucial for maintaining optimal engine temperature and performance. Always ensure to use the recommended coolant type for your Outback.


What antifreeze to use for 2003 Subaru Outback Legacy?

For a 2003 Subaru Outback Legacy, it's recommended to use a high-quality ethylene glycol-based antifreeze that meets the specifications of Subaru's coolant requirements. Look for a coolant that is phosphate-free and compatible with aluminum engines, ideally a Subaru Genuine Coolant or an equivalent that meets the ASTM D3306 or D4985 standards. Always ensure to mix it with distilled water to achieve the proper concentration and prevent corrosion.


What is the American version of the Subaru outback?

The Subaru Outback is sold in the US.


How do you bleed Subaru Outback 3.0 heater system?

To bleed the heater system on a Subaru Outback 3.0, start by ensuring the engine is cool, then remove the radiator cap. Next, run the engine with the heater set to maximum heat and the fan on, allowing air to escape from the system. Monitor the coolant level in the reservoir and add coolant as necessary to maintain the proper level. Finally, check for heat in the cabin to confirm that the system is properly bled.


Where the coolant temperature sensor located in 1996 subaru legacy outback?

http://www.lovehorsepower.com/SubaruDocs/CoolantTempSensor.htmlits a 1995 but same thing


How many valves does the 2001 Subaru Outback have?

The 2001 Subaru Outback has 16 valves.


How many valves does the 2013 Subaru Outback have?

The 2013 Subaru Outback has 16 valves.


How many valves does the 2002 Subaru Outback have?

The 2002 Subaru Outback has 16 valves.


How many valves does the 2005 Subaru Outback have?

The 2005 Subaru Outback has 16 valves.