0
its behind the Power Steering pump assembly pretty much right between the upper plenum and the back side of the pump. it sits straight out off of the fuel rail hard to get to but you can get a tester on it
What else can I help you with?
Fuel pressure schrader valve location on 2002 Ford Focus?
were is the Schrader vale located
How do you know when to replace your fuel pump 1997 Oldsmobile Silhouette?
Toward the rear of the engine is a schrader valve ( looks like a tire valve with a cap) when you depress the valve there should be a fair amount of fuel pressure but when there is very little it most likely is the pump; GM vehicles have their share of fuel pump problems.Good luck.
Where is egr valve Oldsmobile silhouette?
The EGR (Exhaust Gas Recirculation) valve on an Oldsmobile Silhouette is typically located on the engine, often near the intake manifold. To find it, look for a metal or plastic component connected to a vacuum line and electrical connector. The exact location may vary depending on the specific engine model and year, so it's best to consult the vehicle's service manual for precise details.
Which part of the car uses a Schrader valve?
The part of a car that uses a Schrader valve is the tire. The Schrader valve is commonly just called a tire valve. The valve consists of a stem, core and cap.
How can I convert a presta valve to a schrader valve?
To convert a presta valve to a schrader valve, you can use an adapter that screws onto the presta valve. This adapter allows you to inflate your tire using a schrader pump.
How do you use a presta valve adapter when inflating a tire with a Schrader valve pump?
To use a presta valve adapter when inflating a tire with a Schrader valve pump, you need to screw the presta valve adapter onto the presta valve on the tire. This adapter allows the Schrader valve pump to work with the presta valve. Then, you can use the Schrader valve pump to inflate the tire as usual.
How can I convert a presta-to-schrader valve on my bike tire?
To convert a Presta valve to a Schrader valve on your bike tire, you can use an adapter that screws onto the Presta valve. This adapter allows you to inflate your tire using a standard Schrader pump. Simply screw the adapter onto the Presta valve and then use a Schrader pump to inflate the tire.
Can a presta valve be used on a Schrader rim?
No, a Presta valve cannot be used on a Schrader rim as they are not compatible with each other.
What is fuel pump pressure on a 1994 olds silhouette?
connect fuel gauge to schrader valve on fuel rail. Turn key to ON,do not start engine. The pressure should be 42-47 psi.
How can I inflate a tire with a Schrader valve?
To inflate a tire with a Schrader valve, follow these steps: Remove the valve cap from the Schrader valve on the tire. Attach the nozzle of the air pump to the valve. Pump air into the tire until it reaches the recommended pressure level. Remove the nozzle and replace the valve cap.
How do you put air in bike tires with a Schrader valve?
To put air in bike tires with a Schrader valve, follow these steps: Remove the valve cap from the Schrader valve on the tire. Use a bike pump with a Schrader valve adapter. Press the pump nozzle onto the valve firmly. Pump air into the tire until it reaches the recommended pressure level. Remove the pump nozzle and replace the valve cap.
How can I tighten a Schrader valve properly?
To tighten a Schrader valve properly, use a valve core tool to turn the core clockwise until it is snug. Be careful not to overtighten, as this can damage the valve.
