answersLogoWhite

0

The pump is in the tank and the regulator is near the throttle body in the rail. GM has had many fuel pump problems with your model so I would suggest you focus on the fuel pump. I hope this helps you.

New answer; He's right on the pump. But the regulator is mounted on the throttle

body behind the injecters up on top.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Where is the fuel pressure regulator located on 91 Chevy 1500 pickup?

It is located in the throttle body.


Where is the fuel pressure regulator on a 1989 k2500 pickup with a 5.7v8 tbi?

the regulator is located in the throttle housing (where the fuel lines connect)


Where is the oil pressure switch located on a 1993 Chevrolet S10 pickup?

oil filter housing


Where is the fuel pressure regulator on a 2004 GMC pickup?

if its a full size pickup, with a v8, the fuel pressure regulator is in the tank, its part of the sending unit


Where is the voltage regulator located on a 1987 Mazda pickup?

In the alternator


Where is the horn located on a 2006 Chevrolet pickup?

i need to find where they hide the horn on my 2006 Chevrolet half ton pickup.


Where is voltage regulator located on 1991 S10 PICKUP?

It is inside the alternator.


Where is the voltage regulator on a 1974 Chevrolet pickup?

It will be mounted behind the battery where the head lights are. It could be on the fender where the battery is.


Where is 1994 Toyota Pickup Fuel Pressure Regulator?

The fuel pressure regulator on a 1994 Toyota Pickup is typically located on the fuel rail, which is mounted on the engine. It’s often cylindrical in shape and connected to the fuel line. To access it, you may need to remove the engine cover or other components, depending on the specific engine configuration. Always ensure the fuel system is depressurized before attempting to service the regulator.


What is the fuel pressure for a 1991 Toyota pickup?

38-44 psi with pressure regulator vacuum hose disconnected and plugged


Where is the fuel pressure regulator on a 1982 S-10 PICKUP?

That vehicle has a mechanical fuel pump and a carburetor. The fuel pump has a built in regulator and is not serviceable.


Where is the fuel pressure regulator located on a 1995 Isuzu pickup?

Fuel Pressure Regulator is located on the fuel rail.Fuel Pressure Regulator1. Disconnect the negative battery cable.2. Properly relieve the fuel system pressure.3. Remove the air cleaner outlet tube(s).4. Remove any necessary components to access the pressure regulator.5. Disconnect the vacuum hose from the pressure regulator.6. Remove the pressure regulator attaching screws.7. Remove the pressure regulator from the fuel rail.To Install8. Discard the O-rings on the pressure regulator and replace them with new ones.9. Lubricate the O-rings with clean engine oil.10. Install the regulator into the fuel rail and tighten the retaining screws.11. Connect the vacuum hose to the regulator.12. Install any components removed to access the regulator.13. Install the air cleaner outlet tube(s).14. Connect the negative battery cable.