It takes a mechanic with the appropriate NexIQ box to do. What you really need to do is diagnose what's causing the light to come on. It could be something which needs immediate attention, or it could just be a sensor gone awry. The NexIQ box will receive fault codes from the ECM, allowing the problem to be identified and rectified.
you buy a reset tool from parts shop
To reset the service light on a 2011 Sprinter, turn the ignition key to the "On" position without starting the engine. Press the gas pedal slowly three times within 10 seconds. Then, turn the ignition off and start the engine to check if the service light has reset. If the light remains on, repeat the process.
how to reset manually edc light mercedes benz sprinter 311
The only way to clear the service light is by using a scan tool on the newer models.
To reset the oil service light on a 2009 Sprinter van, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and start the engine to check if the oil service light has been reset. If the light remains on, repeat the process.
To reset the service light on a 2004 Mercedes-Benz Sprinter, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn the ignition off and then back on to verify that the service light has been reset. If the light remains, you may need to repeat the process.
To reset the service light on a Mercedes Sprinter, turn the ignition key to the "on" position without starting the engine. Press the gas pedal three times within 10 seconds. Turn off the ignition, then start the engine to check if the service light has been reset. If it remains on, you may need to repeat the process or consult the vehicle’s manual for specific instructions.
what year or VIN no is your sprinter
After the cause of the code is repaired, the light is reset with a scan tool.After the cause of the code is repaired, the light is reset with a scan tool.
Hiw do you reset a service light j2
To reset the service mileage on a Sprinter van, first turn the ignition to the "ON" position without starting the engine. Then, navigate to the trip computer using the steering wheel buttons until you find the service menu. Press and hold the "OK" button while highlighting the reset option, and confirm the reset when prompted. Finally, turn off the ignition to complete the process.
reset service engine light