Should be under the distributor cap
Under the front of the right cylinder head. If you look up from underneath you can see the three wire connecter. ************please note that this answer is wrong...this is the location of the CRANK SHAFT SENSOR****************
The cam sensor is the "pick up" plate in the distributor. That is the black plate under the rotor.
A 2002 Dodge does have a cam sensor, but the 318 was not offered after 2001.
Yes
A 1989 5.9L Cummins does not have a cam sensor.
The cam sensor is inside the distributor and tells the computer the rotational location of the camshaft.
position cam sensor 3.9 licon ls
IS this a 5.2, if so the crank sensor is on the passenger side of the engine, in the far rear, it picks up off the flywheel, the cam sensor is located inside the distributor (it is the pick up coil).
what is location of cam positioning sensor on 2005 scion xb
The cam sensor is in the distributor.
Yes, it is the pick up plate in the distributor.
It is under the front of the passenger side cylinder head.