0
In 1979 Pontiac did not make available any 455 (cubic inch) engine. The largest available was a 400 4bbl in the Pontiac Trans Am (220 net horsepower). Also the "rocket engine" description was only applicable to the Oldsmobile Division. The 455 Rocket Engine (Oldsmobile) was discontinued in 1977 where the largest engine was the 403 cubic inch Rocket Engine V8 rated at 185 net horsepower available on the 98 (a 350 cubic inch was standard) and the Toronado. It was also sold to the Buick division and available on the Riviera.
What else can I help you with?
What is the torque specs of a Toyota corolla 1.3L 2E engine?
There are torque specifications for every bolt in a Toyota Corolla 1.3 L engine. The head bolt torque specifications is 70 pounds.
What are the engine torque specifications for an Isuzu 4jx1 engine?
The 4JX1 engine torque rating is 333Nm (246 lb/ft) @ 2200rpm.
What is the torque specification for Mazda T3000?
What is the torque specifications for Madza T 3000 engine
What are the torque specifications for the head bolts for a 3.4 2000 Pontiac Montana?
The torque specifications for the head bolts on a 2000 Pontiac Montana with a 3.4L engine typically are 22 ft-lbs (30 Nm) for the initial stage, followed by a second stage of 37 ft-lbs (50 Nm), and finally, a third stage of 90 degrees. Always refer to a repair manual for the precise sequence and any additional specifications specific to your vehicle. It's essential to ensure the engine is at the correct temperature and that the threads are clean for accurate torque application.
What is the torque on head bolts for a 3800 Pontiac engine?
The 3800 Pontiac engine had bolt torque specification is 160 pounds. The head bolts should be torqued in 40 pound intervals.
What is the torque specs for the crank bearing main caps and rod bearing caps on a 99 Pontiac grand prix 3.1L?
For a 1999 Pontiac Grand Prix with a 3.1L engine, the torque specifications for the crankshaft main bearing caps are typically around 70 ft-lbs. The rod bearing cap torque specification is generally about 45 ft-lbs. Always consult the specific service manual for your vehicle for the most accurate information, as specifications can vary slightly based on engine production variations.
Torque specs for a 1997 Acura 3.2tl?
There are dozens of torque specifications for your 1997 Acura 3.2 liter engine. A complete list of torque specifications can be obtained from most Acura dealerships.
What are the torque specifications for a 1996 Toyota Camry?
What engine? 2.2 litre
What are the torque specifications on 6.1 2007 dodge?
For what part? Installation Torque? (Engine torque production is about 420 lb-ft )stock.
Rocker arm torque specs for 1997 Pontiac Transport 3400?
The 1997 Pontiac Transport 3400 rocker arm torque specifications are 18 pounds. The rocker arm should be torqued in six pound intervals.
What are torque specs for 1966 Pontiac GTO flywheel?
The torque specifications for the flywheel on a 1966 Pontiac GTO are typically around 75-85 ft-lbs for the flywheel bolts, depending on the specific engine and application. It's crucial to use a proper sequence when tightening the bolts to ensure even pressure. Always consult a service manual for the specific model and engine type for the most accurate information.
What are the torque specs for C 15 cat rod and main bearings?
The Caterpillar C15 diesel engine torque specifications for the rod bearings is 35 pounds. The main bearing torque specifications is 350 pounds.
