0
A 2005 Envoy may stall when the air conditioning is turned on due to several potential issues. One common cause is a failing idle air control valve, which struggles to adjust the engine's idle speed with the added load of the AC compressor. Additionally, a weak battery or failing alternator might not provide sufficient power to support both the engine and the AC system. Lastly, a clogged air filter or issues with the fuel system could also contribute to stalling under increased load.
What else can I help you with?
Gmc Vehicle stall when air condition turned on?
This is probably a dirty throttle body. It should be removed and cleaned.
Why does a 1985 2.8L Camaro stall when AC turned on?
if it is squeling then your compreser is locking up causeing it to stall mine did it
What causes 1989 Chevrolet to stall when turning?
There's a high pressure switch on the power steering line that activates when the steering wheel is turned all the way in any direction. This activates the AC compressor, which raises the RPM's. If the switch is not working, then the vehicle could stall.
What would cause a Mitsubishi 3000 GT to stall when you turn on the AC?
The AC pump is bad. When the AC is turned on the pump tries to turn, because it is bad the extra strain on the motor causes it to stall. Be carely this can break or through a belt. In short its like putting a "brake" on your motor.
What causes 1998 accord to stall?
A 1998 Honda Accord could stall because it is out of gas. The car could also stall because of a bad computer.
What causes 86 Chevy with 305 to stall and backfire bad fuel pump?
It sounds like some sort of lean condition. Perhaps a vacuum leak? Plugged fuel filter?
What causes a car to stall while turning?
sensor or belt
What causes a car stall while turning?
sensor or belt
2003 Ford Focus engine stalls when air conditioning is turned on?
why 2003 ford focus stall when air conditioner is turned on
What is stall condition of motor?
Stoll condition of a motor or Stall torque is the torque which is produced by a device when the output rotational speed is zero. It may also mean the torque load that causes the output rotational speed of a device to become zero - i.e. to cause stalling.Stalling is a condition when the motor stops rotating.This condition occurs when the load torque is greater than the motor shaft torque i.e. break down condition.In this condition the motor draws maximum current but the motor does not rotate.The current is called as Stalling current.
What causes a 1996 Altima to stall while driving?
Oil in the distributor.
What causes the vehicle to stall?
Most often it is poor driver control.
