answersLogoWhite

0

white if its tbi

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What color is the tach wire in a 1991 Chevrolet Silverado?

what colour is the wire i use to hock up a tach on a 1989 Chevy 350


Where does the lead wire tachometer go on to the coil And what color is the wire need to be for a 1989 1500 Chevy truck?

You can check for an instruction sheet at the manufacturer's website, but most tachs have a black wire for ground, a red wire that is hot, a white wire that is hot, and a green wire that goes to the negative or tach terminal of the coil.


What color is the tach wire on a distributor cap?

green


How do you install a sun tach 2 in a 83 Chevy 350?

look on the distributor cap, there is a slot marked "tach", connect the hot wire there and ground the other wire


How do you connect a tach on a 1998 Chevy Cavalier?

Connect the green wire to the brown striped black wire.


What color is the reverse light wire for a 1997 Chevy 1500 4 by 4 Cheyenne?

light green


What color is the tach wire on 1993 ford F150 302 V8?

at the tach it is white-pink green at coil


What color wire is associated with the brake light on the rear of a 97 Chevy 1500?

one black,and one green


What color is the tach wire?

You need a wiring diagram for that answer. each vehicle is different.


Which white wire do I hook the green tach wire to since there are two white wires going to the coil on my 90 Chevy 350?

one white wire goes to the distributor, the other goes nowhere. This is the lead that goes to the tach


Where do you attach the wire to add a tach to your 93 Chevy S10 Blazer 4.3 V6?

The ground wire of the coil. Its the white wire with a black stripe.


Does the live wire from the ignition key go to the bat terminal and a live wire from the starter go to the tach terminal on a hei distributor for 350 Chevy in a boat with non standard wiring?

You do need a switched live to the bat terminal, but not to the tach terminal. The tach terminal is the negative side of the coil, the bat terminal is the positive side of the coil. Normally the tach terminal is for the green wire from the tach.