"Entretien Programme" translates to "Maintenance Program" in English. On a 2004 Jeep Grand Cherokee, this warning alert indicates that the vehicle is due for scheduled maintenance or service, such as an oil change or other routine checks. It's a reminder for the driver to address maintenance needs to ensure the vehicle operates efficiently and safely.
To reset the overhead warning light, hold the SELECT and UNITS buttons on the trip computer for 5 seconds. The service interval light will be illuminated and then extinguish after approximately 4 seconds.
if you have an overhead console, just change the mileage intreval due. Press the step button until 0 miles to service is displayed. Press and hold reset until the mileage resets.
Time for an oil change.
Time for an oil change.
cutting fuel while driving
Either the traction control system is active or has a failure.
To reset the warning lights on a 2005 Jeep Grand Cherokee, start by turning the ignition key to the "On" position without starting the engine. Then, press the gas pedal three times within ten seconds. After that, turn the ignition off and then restart the engine; the warning lights should be reset. If the lights remain on, it may indicate an underlying issue that needs to be addressed.
9 feet, according to 2 internet sites that sell low clearance warning bars.
The Easiest way would be to locate it under the dash panel and simply unplug it.
www.NAXJA.org
Bring to a shop that has an ABS scanner to determine the problem
When "LOWASH" appears on your Jeep Cherokee's dashboard, it indicates that the vehicle's windshield washer fluid level is low. This warning prompts you to check and refill the washer fluid reservoir to ensure proper visibility while driving. It's important to address this warning promptly, especially in adverse weather conditions.