Q es ese codigo q
711925
module configuration error or failure or incomplete
Buy a new truck.
The Lincoln Navigator keypad entry code can be found in the back of the owners manual. You can only use the keypad entry code once and then you will have to enter your personal entry code.
Each vehicle that has keyless entry has its own code
Click on the link below Click on Owner Guides The Owner Guide ( which includes the instructions ) can be viewed online
To reset the door keypad on a 2004 Lincoln Navigator, first, ensure the vehicle is in the "Off" position. Then, press and hold the "1" and "2" keys simultaneously until the keypad light flashes, indicating the system is ready to be programmed. Enter your desired five-digit code within five seconds, and the light will flash again to confirm the new code is accepted. Finally, test the new code by locking and unlocking the doors.
Somthing in denmark stinks..........
Pass.side kick panel.. remove the plastic door with a flash light..look at the control module (above the fuse box) that has the ford Number on it. It will be a five digit code in bigger numbers.
The keypad code is usually on a plastic card in the owners manual, or located near the top right hinge on the tail gate when open. It will be on a with adhesive tag. Normally 5 digits. Hope this helps
You can find code to open the door of a 2000 Lincoln Navigator in the owner's manual, which typically includes information on the factory keyless entry code. Alternatively, you can retrieve the code from the vehicle itself, often located on a sticker in the glove compartment or near the driver's side door. If these options are not available, consider contacting a Lincoln dealership or a locksmith for assistance.
advance auto or OB II code reader