It can be done but it would not be cost effective. Better just purchasing another 1995 Escort with a standard transmission.
is it an automatic or standard?
how hard is it to remove a flywheel on 2002 volvo s80
The cost of labor to replace a flywheel on a Dodge Caravan typically ranges from $300 to $600, depending on the mechanic's hourly rate and the complexity of the job. This estimate usually includes 4 to 8 hours of labor, as accessing the flywheel often requires removing the transmission. Additional costs for parts and fluids should also be considered, which can add several hundred dollars to the total expense. Always check with local shops for the most accurate estimates.
That is a round steel plate bolted to the output end of the crankshaft to which the clutch or the torque converter is attached and into the circumference of which are milled teeth into which the starter pinion gear engages that, by its rotational inertia, smooths the pulsations of the combustion stroke. It makes the engine run smoother. Typically, it is more cost effective to replace the flywheel than it is to repair it. A new flywheel will be less likely to cause you to have to pull the engine or drop the transmission which probably is going to cost you a half-day's worth of labor.
It should only cost about $50-$90 to replace the Flywheel of a 2000 Ford Windstar, is a person is doing the work themselves. If they are not it can cost $150+ depending on labor charges.
depends on who's doing the repairs.
around 3-400 dollars
Option A : Remove engine Option B: Remove transmission Option C: Seek Professional Help Cost would be very expensive unless you have a private mechanic. My price 350 Dealer cost Possibly 1,000.00 or more Average Private Mechanic 250.00 - 500.00 I personally would remove the starter,transmission linkages,wires, cooling lines and driveshaft from rear end. Then i would remove all mounting bolts to trasnmission and then remove transmission mount and drop the transmission using a transmission jack. Slide the transmission back enough to get an impact wrench to remove the flywheel then put the impact on the lowest setting ( 1 ) to install the new flywheel. Then take a breaker bar or torque wrench and torgue the bolts down and then put eveything back the same way you removed it. And always remember to disconnect the battery before starting this procedure especially when removing starter. 1 bad spark and you could go blind,start a fire, or simply fry everything in the system. GOODLUCK!!
It will cost approximately $400 in labor to change the transmission in your 1992 BMW 325. A rebuilt transmission will cost approximately $600. A brand-new transmission will cost approximately $2000.
Standard cost is the cost which is basis to measure the actual cost historical cost is the initial cost
Replacing the five-speed transmission with a brand-new five-speed transmission will cost approximately $3500. Replacing the transmission with a rebuilt transmission will cost approximately $2500.