0
What else can I help you with?
Where is the timing mark located on the harmonic balancer for a 1989 Chevy 2.8 v6 engine?
If you look at the harmonic balance you will see on the front of it a medium size circle. That will be your timing mark.
Are the front and rear fatboy solid rims the same?
bolt pattern and size is different for the pulley on the rear and the rotor on the front
What size rotor is on 2003 VW Passat GL?
i need knows wtah size is rear and front brake discs.
What size is nut on front hub to take the roter?
What size is the nut on the front break system to take the rotor off. Of my 2002 Trailblazier LT 4.2l 4x4.
How do you take off the front end rotors on a 1988 full size bronco?
Dissasemble the hub the pull off the rotor with the lugs then use a hamer to punch out the lugs out of the rotor
2002 Chevy Trailblazer front hub nut size?
The front hub takes a 35mm deep socket. (It is not necessary to remove the hub to change the rotor.)
What is the size of front speakers on 1989 Mazda b2600 truck?
The front speakers in a 1989 Mazda B2600 truck measure 5 inches by 7 inches. These speakers are located in the front doors.
Is 07 gsxr 600 front rotor the same size a one off a 05 gsxr 1000?
yes! they are the same
What size are the front speakers in your 1989 Toyota corolla?
to the best of my knowledge:5"
What size are 1989 Honda accord speakers?
5 1/4 front and rear
How do you replace left front rotor 1992 F1504x4 cannot disassemble bearings to remove rotor?
to dissasemble wheel bearings you need a special socket after you remove 4x4 hub this special socket will only fit the front bearing nut .a different size is used on the rear
What size torx socket to remove front rotor on 2004 Monte Carlo?
To remove the front rotor on a 2004 Monte Carlo, you typically need a T30 Torx socket. Make sure to check for any additional fasteners or components that may need to be removed to access the rotor properly. Always refer to the vehicle's service manual for specific details and torque specifications.
