its never a good idea to go to heavier fuse the potential exists for amp draw to be hig.h enough to damage a component or inaccessable wire
Probably...The 6V 40A relay figures out as 240Watts...The same relay at 12V 30A figures out as 360Watts.
Fuse 104 (40A). Hope this helps! Fuses are detailed and illustrated in the Owners Manual - See "Related Questions" below for more
The recommended wire size for a 40A circuit is typically 8-gauge wire.
if the appliance is manufactured after 1920 it will have a nameplate somewhere near the power connection. this nameplate SHALL have the amperage and voltage required. the fuses in a house are sized so as to not set the house wiring on fire. that being said water heater nameplate 28A 240V can be on for periods longer than 20 minutes (continuous duty) so must derated 10% 31A . minimum standard wire size #8 30A, 35A or 40A fuse no time delay needed. air conditioner 25A 120A LRA 240V minimum standard wire size #10 30A fuse time delay needed.
4A
The Electric Company - 1971 40A 5-40 was released on: USA: 12 December 1975
10mm2 : 40A
AWG # 8 copper
no because it is an even number but not 2
In the 2003 Saturn Ion, the battery feed fuse is typically located in the under-hood fuse box. It is usually labeled as "BAT" or "Battery" and is often a larger amp fuse, such as 40A or 30A, depending on the specific configuration. Always refer to the owner's manual for the exact fuse location and specifications for your vehicle.
The main fuses protect the feeder lines from the electric company's feed to the main panel for the maximum ampacity rating of the wire. So depending on the size of the incoming tails nothing is gained by reducing the main supplier's cut-out fuse rating to 60A or 40A.
The Wards Western Field Model 40A 22 Rifle was manufactured by the Mossberg company. It was sold under the Western Field brand, which was a private label used by Montgomery Ward, a retail chain in the United States. The Model 40A is a bolt-action .22 caliber rifle, popular for its reliability and performance.