Long mounting bolts 22-29 ft lbs
Short mounting bolts 96 - 132 in lbs
Pulley bolts 108 - 132 in lbs
The 1997 Buick LeSabre intake manifold bolt torque specifications is 45 pounds per square inch. The manifold bolts should be torqued in 15 pound intervals.
the torque for a 1988 lesabre custom is 110 ft. lbs.
According to the chilton manual the 5 water pump bolts torque to 89 inch pounds. The four bolts that hold the water pump pulley torque to 18 foot pounds.
The net torque on the pulley will be the difference in the torques exerted by the two forces. The torque due to the 20 N force will be 20 N * (radius of pulley), and the torque due to the 30 N force will be 30 N * (radius of pulley). Subtract these two torques to find the net torque on the pulley.
Pulleys can be used to increase torque or speed, depending on how they are configured. When the pulley with a larger diameter is driving a pulley with a smaller diameter, torque is increased while speed is reduced. Conversely, when a small pulley is driving a larger pulley, speed is increased while torque is reduced.
The torque on a pulley with mass affects its rotational motion by determining how quickly it accelerates or decelerates. A greater torque will cause the pulley to rotate faster, while a smaller torque will result in slower rotation.
Yes, the size of the pulley does matter as it can affect the speed and torque of the system. A smaller pulley will result in higher speed but lower torque, while a larger pulley will provide lower speed but higher torque. The size of the pulley also influences the belt or chain compatibility and tension in the system.
Large drive pulley, small driven pulley = faster rotation but less torque. Small drive pulley, large driven pulley = slower rotation but more torque.
The relationship between pulley torque and the efficiency of a mechanical system is that higher pulley torque can lead to lower efficiency. This is because higher torque can result in more friction and energy loss in the system, reducing its overall efficiency.
The relationship between the mass of a pulley and the torque it generates in a mechanical system is that the greater the mass of the pulley, the more torque it can generate. This is because the mass of the pulley affects the moment of inertia, which is a measure of how difficult it is to change the rotational motion of an object. A heavier pulley will have a higher moment of inertia, requiring more torque to accelerate or decelerate it.
anywhere from 85 pounds torque to 90 pounds torque will work, but factory is 87 pounds torque. personnally, i set mine at 100 pounds torque
The specific amount of torque needed to tighten the main crank pulley will vary depending on the vehicle make and model. It is important to refer to the manufacturer's specifications or repair manual to determine the correct torque requirements for your specific vehicle. Over-tightening or under-tightening can lead to damage and should be avoided.