0
The specific amount of torque needed to tighten the main crank pulley will vary depending on the vehicle make and model. It is important to refer to the manufacturer's specifications or repair manual to determine the correct torque requirements for your specific vehicle. Over-tightening or under-tightening can lead to damage and should be avoided.
What else can I help you with?
What is the net torque on the pulley about the axle the pulley is 4cm in diameter and one side of the string has 20N and the other has 30N?
The net torque on the pulley will be the difference in the torques exerted by the two forces. The torque due to the 20 N force will be 20 N * (radius of pulley), and the torque due to the 30 N force will be 30 N * (radius of pulley). Subtract these two torques to find the net torque on the pulley.
Do pulleys increase torque or speed?
Pulleys can be used to increase torque or speed, depending on how they are configured. When the pulley with a larger diameter is driving a pulley with a smaller diameter, torque is increased while speed is reduced. Conversely, when a small pulley is driving a larger pulley, speed is increased while torque is reduced.
What is the relationship between the torque on a pulley with mass and its rotational motion?
The torque on a pulley with mass affects its rotational motion by determining how quickly it accelerates or decelerates. A greater torque will cause the pulley to rotate faster, while a smaller torque will result in slower rotation.
Does the size of the pulley matter?
Yes, the size of the pulley does matter as it can affect the speed and torque of the system. A smaller pulley will result in higher speed but lower torque, while a larger pulley will provide lower speed but higher torque. The size of the pulley also influences the belt or chain compatibility and tension in the system.
What is the relationship between the pulley torque and the efficiency of a mechanical system?
The relationship between pulley torque and the efficiency of a mechanical system is that higher pulley torque can lead to lower efficiency. This is because higher torque can result in more friction and energy loss in the system, reducing its overall efficiency.
How do you torque electrical wires?
With a torque wrench that displays inch-pounds. Not too often foot-pounds. Or tighten with wrench or screwdriver until snug. Then move wires back and forth and tighten until snug again.
What does lbf ie. tighten bolt to 30 lbf stand for when tightening a serpentine belt?
pounds of force Foot pounds or torque. Measured with a torque wrench.
Need torque on injector hold down clamps on 3126 cat?
In order to change the torque you will need to tighten the bolt on the exhaust side of the injector to fifty inch pounds. Tighten the drivers' side bolt to nine foot pounds.
What are the intake manifold torque specs for a 1999 Chevy Tahoe?
Carefully tighten the bolts in a crisscross pattern to 45 inch pounds. Then re-tighten them to 83 inch pounds.
How do you re-torque an oil pan on an 89 suburban?
Tighten to 20 foot pounds. Do not overtighten.
How many pounds of torque for a 96 Saturn valve cover?
The torque spec is 89 in-lbs not ft lbs. Tighten in sequence from the inside out.
How much torque do you need to tighten a crankshaft pulley?
It depends on the engine, and is always stated in the vehicle manual. ( which is one excellent reason for always using the relevant manual when working on things you don't know about ) . -On most of the cars I have worked on the crankshaft pulley is tightened to between 95 and 110 foot pounds.
How do you replace air conditioning belt on 2000 mitsubitsi montero?
On the tension pulley above the AC unit there is a tension bolt behind the pulley. Loosen the front nut on the front of the pulley then loosen the long bolt to drop the pulley until the belt fits. Tighten the long back bolt until the belt is tight ( see manf. recommendations on torque ) then tighten the bolt on the front of the pulley.
How much torque in needed on the flywheel bolt of a Nissan 300zx?
Flywheel Torque 61-69 Foot pounds
Do you need to know what the torque would be to find out if the idler tension pulley has to be torqued when you install the serpentine belt on a 1995 Oldsmobile Cutlass Supreme?
there is not a specific torque for the idler pully. tighten it up with a ratchet and it will not loosen up
What is the torque specification on a water pump for a 1998 buick skylark wth a 3.1 liter engine?
According to the chilton manual the 5 water pump bolts torque to 89 inch pounds. The four bolts that hold the water pump pulley torque to 18 foot pounds.
What is the net torque on the pulley about the axle the pulley is 4cm in diameter and one side of the string has 20N and the other has 30N?
The net torque on the pulley will be the difference in the torques exerted by the two forces. The torque due to the 20 N force will be 20 N * (radius of pulley), and the torque due to the 30 N force will be 30 N * (radius of pulley). Subtract these two torques to find the net torque on the pulley.
