Go to Wal Mart or Autozone and buy the harness adapter kit. Wire the connector to your stereo, and then plug the connector in the factory stereo harness and you are done. Easiest and cleanest way to install aftermarket stereos. Cost less than $20. or........ go to www.12volt.com.....right there hey have the wiring diagrams for almost n e thing
How do you install an after market stereo in a 1989 acura legend?
try installdr.com
go to a place where they sell car stereos and ask for a wire harness for your van they only cost about 20 bucks and they pulg into your factory wire harness and the harness wires should be color matched to your stereo if it an after market stereo
Attached the wiring harness and the antenna cable to the back of your stereo. Slide the stereo into the stereo slot. Tighten the stereo with the stereo retaining screws.
Yes, a special wiring harness is typically needed for an aftermarket stereo installation to ensure compatibility with your vehicle's electrical system. This harness simplifies the process by allowing you to connect the new stereo to the existing wiring without cutting or splicing. Using the correct harness helps avoid potential damage and ensures a cleaner install, often providing a plug-and-play solution. Always check the specifications for your vehicle model to find the appropriate harness.
Go to your local Canadian tire and buy a plug that goes from stereo harness to your stock harness!
Connect the wiring harness to the back of your 1995 Buick LeSabre stereo. Secure the stereo with the stereo retaining screws.
Begin by removing the decorative cover to your stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
MAYBE WAL-MART IF NOT A STEREO INSTALL SHOP
They all should be attached to a wiring harness un less your install a radio then not all wires will be attached to the after market harness in most cases the wires that are not attached can be used to hook up subwoofers
# you can buy a after market wire plug from walmart that plug into factory harness plus a universal steore insulation from walmart