answersLogoWhite

0

Stop, contact the tower to ask permission to cross the runway

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What must an operator do when approaching an active runway?

Stop, contact the control tower for permission to cross.


What must an operator do when approching an active runway?

At an airport with a control tower already have taxi clearance to cross all runways or get clearance from ATC to cross the runway. :)


Before a vehicle may operate on the runway the vehicle operator must have what?

Permission from the tower to proceed onto the runway. They would normally get this via a radio and would need to stay in radio contact with the tower, should the need be required for them to clear or "vacate" the runway.


When Tower signals a vehicle on the runway with a flashing red light the operator must stop and radio the Tower for instructions?

When Tower signals a vehicle on the runway with a flashing red light, it indicates that the operator must immediately stop and not proceed further. The operator should then radio the Tower to seek clarification and instructions on how to proceed safely. This protocol ensures the safety of both the vehicle and any aircraft in the vicinity. Following these procedures is crucial for maintaining a safe operational environment at the airfield.


Which of the choices listed would not be a general procedure that snow teams must follow?

Always work the snow from one side of the active runway to the other, no matter the wind direction


When the MAAS trailer is towed into position what part of the trailer must face the runway?

runway edge sheave


Should a runway be made smooth or rough?

A runway must be smooth in order for an airplane to land safely on it.


Vehicles responding to an emergency on the runway must NEVER assume they have blanket permission to enter the runway after an emergency aircraft lands?

Emergency vehicles must always assume that a runway is being used for air traffic, even after an emergency landing. They must wait until cleared by the tower before moving onto the runway and not assume they can go once the emergency craft has landed.


When using the LWFB how far from the runway centerline must the MAAS trailer must be located?

275


How fast do jumbo jets travel on the runway?

A jumbo jet must reach a speed of 360 km/hr (225 mph) on the runway for takeoff.


How can I attend a Tommy Hilfiger runway show?

Most runway shows are by invite only. You must find someone affiliated with the show to get on the guest list.


How can one determine if an operator is Hermitian?

To determine if an operator is Hermitian, one must check if the operator is equal to its own conjugate transpose. This means that the operator's adjoint is equal to the operator itself. If this condition is met, then the operator is Hermitian.