0
To remove and replace floating caliper mounting bolts. 3/8" and 8mm hex bits are used for General Motors vehicles. 7mm and 1/4" hex bit are used for Ford. 2003-2006 Ford Expedition use the 7MM hex bit.
7MM hex bit does not work on a 2006 Expedition. Looks like it requires a 9MM, the only one that is not included in my hex set.
On a 2006 Expedition Limited, the front calipers use a 9MM hex bit while the rear calipers use a 7MM hex bit.
What else can I help you with?
What size Allen socket is needed to remove caliper bolt on a 2004 Escape?
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
What size Allen socket is needed to remove caliper bolt on a 2005 Expedition?
Try a TORX T-40 or 45 Many second generation Expeditions (2003-2006) use a 9mm to remove the front caliper and a 7mm for the rear.
What tools are needed to change the rotors on a 2007 Camry?
21mm socket and breaker bar to remove lug nuts, and a 17mm socket to remove the two caliper bracket bolts, and a 14mm socket or wrench to remove caliper from bracket. you will also need a c-clamp to shove caliper back.
How do you remove the front brake pads on a 2002 ford expedition - do I need a special tool?
You will need an 18mm socket and T45 torx (star) socket also. These will be used to remove the caliper from the rotor. The caliper has 2 parts that use a rail to align themselves and the brakepads.
What size Allen socket is needed to remove bolt from caliper on 2002 ford escape?
I have a 2003 Escape and it took a 7 mm socket.
What size socket is needed to remove caliper bolts on a 1996 Chevy s-10 4x4?
A 3/8" Allen socket or wrench will work.
What kind of wrench is needed to remove the front caliper bolts on a 2005 dodge stratus?
7mm hex socket
What wrench is needed to remove brake caliper for 1992 ford tempo?
your going to need a t-40 torx socket.
What size socket for a 2006 expedition 4x4 front caliper bolt?
9mm hex
Star socket size brake caliper 2000 expedition?
Caliper retaining bolts. Torx T-40 or T-45
What size wrench is needed to remove the brake caliper bolts on a 1991 Honda Accord?
use an Allen wrench not a socket or open or box wrench.
How do you disconnect the rear caliper and rotor?
in order to remove the rear caliper, you first remove the parking brake cable using a 14mm socket to remove the bolt. After removing the parking brake you can remove the caliper carrier, using a 17mm socket to remove the two caliper carrier bols this allows you to remove the caliper from the rear rotor, you can slide the caliper off of the carrier to remove it completely. to remove the rotor you can use a soft faced mallet and gently tap the inside of it and it should come right off.
