You will need an 18mm socket and T45 torx (star) socket also. These will be used to remove the caliper from the rotor. The caliper has 2 parts that use a rail to align themselves and the brakepads.
9mm on front 7mm on back
To replace the front brake pads on a 2002 Ford Expedition, first, lift the vehicle and remove the front wheels. Then, locate the brake caliper, unbolt it, and carefully slide it off the brake rotor. Remove the old brake pads from the caliper bracket and compress the caliper piston using a C-clamp or brake tool before installing the new pads. Reassemble the caliper, ensuring everything is properly secured, and then reattach the wheels and lower the vehicle.
how do you remove the grill from a 2008 ford expedition?
= What tool to remove a front brake pads on a 2007? =
Lift the car on a car jack, remove the tire off the car, remove the brake shoe/caliper and remove the old brake pad. Next put in the new brake pads, put the brake shoe/caliper in its place, put the tire back on the car and slowly lower the car to the ground.
No there not press on. They are Flowting Rotors. You will need a 3 jaw gear puller to be able to remove them easy.
anything special about changeing brrake pads on Lexus 300 es
remove wheels.remove brake calipers, remove 4x4 locking hub.with special socket remove axle locking nut. brake rotor will the slide off enabling you to change bearings
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
you have to remove the caliper to access the brake pads
purchase special tool for removing hub nut on front wheels rear wheels have different size and believe me you will need this special tool or you will trash the hubnut and they are very expensive to replace remove front wheel remove brake caliper remove dust cap from centre of hub with special toolremove hub nut remove rotors making sure not to drop the bearings in the dirt istallation is the opposite of removal NOTE i fu leave fluid line connected to caliper, you will not have to bleed the system
to remove front rotors you need to remove wheel. then remove 4x4 locking hub.remove brake caliper. next you need a special socket to fit the axle nut.remove this and the outer bearing.then slide rotor off axle making sure not to drop inner bearing.