answersLogoWhite

0

3/8 bolts with standard SAE threads that are no less than one inch long. these bolts will have a 9/16 head. i recomend GRADE 8 bolts. lesser grade bolts will work but can sheer. i used 1 1/4 inch long bolts on my big block with no issues. oh and there are 6 bolts that go from bell to block

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you change a turbo on a Subaru impreza?

Remove the intercooler and Y pipe. Undo the turbo intake pipe. Jack the car up and undo the turbo downpipe. Sould be about 4 screws on the downpipe at a size of 15-16mm. Remove the turbo heat shield and any pipework going from the turbo to the engine. Then remove the bolts that connect the turbo to the block, should be 2 or 3 screws at size 15. Then the turbo should pull apart. Use penetrating fluid as the bolts weld themself to the turbo due to the heat.


What size are the starter bolts on a 1994 GMC 6.5 turbo diesel?

What size is the starter bolt on 6.5 turbo diesel starter?


Can you put a turbo in a Trans Am?

What year? and what size is the motor?


DO you need a bigger engine if you install a hybrid turbo?

No as long as the hybrid turbo is the right size. You get the turbo that fits the motor.. not the other way around.


What size are the bolts that connect the engine to transmission in a 1989 Dodge Shadow Turbo?

Should be between 15mm or 18mm


Size of bolts connecting starter to engine block?

Most likely 1/2"


Is there a bellhousing that bolts a t-5 trans to a big block ford?

t5 tranny, what size bolts secure the tranny to the bellhousing?


How many head bolts do you have too remove on a 5.7 Chevy motor?

i just removed the heads in my 70' Chevy Monte Carlo. its a small block so i had to remove 17 head bolts. big blocks however are differrent. so it depends on the size engine you have.


What size motor has block casting numbers 14093638?

chevy 350


What size motor is in a 1987 Mercedes Benz 300D turbo diesel?

3 liter six cylinder


Block casting numbers 3892657 what size motor?

what does the casting number GM 3892657 say about this engine block


What motor size is this 396021f?

68-72 Oldsmobile big block 455