0
What else can I help you with?
What size socket should you use for spark plugs for your 88 crown Victoria?
Should be a 5/8 spark plug socket.
What size spark plug socket for the Renault scenic?
My Scenic is a 2001 model with a 1998cc motor. The engine type is F4R which has 4 spark plugs. The spark plugs use a 5/8" socket plug. You will need about a 15cm extension on the socket as the plugs are situated deep inside the engine.
What size socket do you use for spark plugs on a 5.2 dodge durango?
16mm or 5/8 inch
What size socket fits a Toyota 22re spark plug.?
Spark plugs use SAE and not Metric. The one that fits it is the one that fits it.
What size Socket for daewoo matiz spark plug?
The spark plug socket size for a Daewoo Matiz is typically 16mm. When replacing spark plugs, it's important to use a deep socket to accommodate the length of the spark plugs. Additionally, ensure that the socket is compatible with your ratchet or wrench to avoid any damage during the installation process. Always refer to the owner's manual for specific recommendations.
Do I need special tools to replace my spark plugs?
To replace spark plugs, you can use a socket wrench, but a socket made for removing and replacing spark plugs is needed. This socket is relatively inexpensive and can be found at most auto parts stores.
How do you remove spark plugs peugeot 106?
To remove spark plugs from a Peugeot 106, start by disconnecting the battery to ensure safety. Then, use a socket wrench with the appropriate size spark plug socket to loosen and remove the spark plug leads. Carefully unscrew the spark plugs by turning them counterclockwise. Once removed, inspect the plugs and replace them if necessary, then reassemble in reverse order.
What size socket do you use on the spark plugs on a Dodge Dakota 3.9 liter v6 engine?
5/8 inch
How do you replace the spark plugs on a 98 Subaru Impreza 2.5 - What size ratchet should you use to get out the old spark plugs?
any size that works usually a 3/8th ratchet You probably meant what size socket Its either 5/8th if the plugs are small or 13/16th if they are big
How do you change the spark plugs on a 1985 s10 blazer?
You can begin by removing the spark plug wires from your 1985 Chevrolet S 10 Blazer spark plugs. Use a 5/8 deep well socket to turn the spark plugs out. Turning the socket to the left will loosen the spark plugs. Reverse the process to install the new spark plugs.
How do you change spark plugs in a 2004 dodge neon?
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
What size socket does it take to remove the spark plugs on a 2006 Honda vt750 shadow?
To remove the spark plugs on a 2006 Honda VT750 Shadow, you'll need a 5/8-inch (16mm) spark plug socket. It's recommended to use a socket with a rubber insert or a magnetic tip to help retain the spark plug during removal and installation. Make sure to also have a ratchet and an extension for better access to the spark plugs.
