To remove spark plugs from a Peugeot 106, start by disconnecting the battery to ensure safety. Then, use a socket wrench with the appropriate size spark plug socket to loosen and remove the spark plug leads. Carefully unscrew the spark plugs by turning them counterclockwise. Once removed, inspect the plugs and replace them if necessary, then reassemble in reverse order.
your coil is most likely gone
the spark plugs on a 106 should be in the top of the engine on earlyer models you should see 4 leads conected to them. a later model may not have ignition leads but a sort of ignition pack on top of the engine. the plugs would be under this.
When changing the spark plugs, it is important to leave the correct sized gap. For a 1999 Peugeot Zest 3 the spark plug gap is 0.8mm + or - 0.1 mm.
Yes
with a bar of soap
0.8 ± 0.1 mm
Hello i have the same car and the answer is 0.9mm
0.8mm plus or minus 0.1 mm
got fuel if so is the starter motor cranking the engine over if to that means battery ok so could be fuel injection pump or carb. spark plugs if petrol
For a Peugeot 106, the spark plug spanner typically needed is a 16mm size. It's important to ensure that the spanner has a 12-point design for a better grip on the spark plug. Always check your vehicle's manual for any specific requirements or variations based on the engine model.
on my r reg 106 i drilled out the 2 rivits
What's the question? Yes, a peugeot 106 has dashboard lights.