For a Peugeot 106, the spark plug spanner typically needed is a 16mm size. It's important to ensure that the spanner has a 12-point design for a better grip on the spark plug. Always check your vehicle's manual for any specific requirements or variations based on the engine model.
The spark plug spanner size for a 1972 MG B is typically 13/16 inch (21 mm). It's important to ensure that the spanner fits snugly to avoid damaging the spark plugs during removal or installation. Always check the specific spark plug type used in your vehicle, as variations can occur.
Its a 13mm spanner that you require.
To remove spark plugs from a Peugeot 106, start by disconnecting the battery to ensure safety. Then, use a socket wrench with the appropriate size spark plug socket to loosen and remove the spark plug leads. Carefully unscrew the spark plugs by turning them counterclockwise. Once removed, inspect the plugs and replace them if necessary, then reassemble in reverse order.
what size spanner
its 8mm square
it is a 5 minute job and no you dont have to strip the engine down . Just follow the four spark plug leads to the plug do one at a time so you dont mix the leads up remove lead by pulling it off the plug remove plug with proper size sparkplug spanner or socket put new plug in but check the gap is correct usally you can get this from any shop that sells the plugs some are preset tighten to reasonable tightness put lead on and do the same with the rest. hope this helps ..
The spark plugs for a Peugeot 206 typically have a thread size of 14mm and a hex size of 21mm. The specific type of spark plug may vary depending on the engine variant, but common options include NGK BKR6E and Bosch FR78X. It's always best to consult the owner's manual or a parts catalog for the exact specifications for your particular engine model.
Spark plug setting should be at .31
what is the spark plug gap size for a 1987 suzuki savage 650?
18 mm spark plug socket
the spark plug gap size on a Mercedes e420 is .32
.035 gap. DPR8ea-9 spark plug