The spark plug socket size for a Daewoo Matiz is typically 16mm. When replacing spark plugs, it's important to use a deep socket to accommodate the length of the spark plugs. Additionally, ensure that the socket is compatible with your ratchet or wrench to avoid any damage during the installation process. Always refer to the owner's manual for specific recommendations.
Pull off the 3 plugs on top of the exhaust manifold. get a spark plug socket and whip em out. Wacky the new one in carefully making sure not to over tighten them
The spark plug gap for a Daewoo Matiz is typically between 0.8 mm and 1.0 mm (0.031 to 0.039 inches). It's important to check your vehicle's manual for the specific gap recommendation for your model year, as it may vary slightly. Always ensure the gap is set correctly for optimal engine performance.
This is an extract from the Daewoo service manual; Unleaded Petrol - 1.1mm 0.043inch 1.2mm 0.047inch Leaded Petrol - 0.8mm 0.031inch
For the Daewoo Matiz 800, the recommended spark plug type is typically NGK BKR6E or equivalent. The gap setting for the spark plugs should be around 0.8 to 1.0 mm (0.031 to 0.039 inches). It's essential to ensure proper torque when installing the spark plugs, generally around 20-25 Nm, to avoid any damage. Always refer to the vehicle’s owner manual for specific recommendations related to your model year.
Engine oil leaking onto the spark plug in a Daewoo Matiz with an 800cc 3-cylinder engine is typically caused by a faulty valve cover gasket or worn-out spark plug tube seals. These components can allow oil to seep into the spark plug wells, leading to poor engine performance and potential misfiring. Additionally, excessive engine wear or high oil pressure may exacerbate the issue. Regular maintenance and timely gasket replacements can help prevent this problem.
The spark plug gap for a 1.0 Daewoo Matiz is typically around 0.8 to 0.9 mm (0.031 to 0.035 inches). It's always a good idea to consult the vehicle's manual or a reliable service guide for the exact specifications, as variations may exist depending on the model year or specific engine configuration. Proper gap settings ensure optimal engine performance and efficiency.
The radiator does not have a drain plug. The easiest way to drain is remove a hose.
Remove cover on top of engine,pull plug wires straight up.The spark plugs will be down in a hole for each cylinder.You need a spark plug socket and a long extention to reach them.
18 mm spark plug socket
5/8 inch spark plug socket.5/8 inch spark plug socket.
You need an 18 mm spark plug socket.
It's on the gearbox, you need to get under the car to access it. It has a 3pin plug.