0
For a 2005 Pontiac Sunfire, the brake caliper bolts typically require a 13mm wrench or socket. It's always a good idea to double-check with a service manual or a reliable source, as specifications can vary slightly depending on the specific model and configuration. Ensure you use the correct size to avoid rounding off the bolts during removal.
What else can I help you with?
What kind of wrench to remove caliper bolts 1997 Pontiac sunfire?
I believe that's a 5/16 or maybe 3/8 Allen.
What size wrench is needed to remove the caliper bolts on the front brakes of a 99 Pontiac sunfire?
You need a 3/8" allan key or hex socket - not a torx
What Size Allen Wrench is needed remove the front caliper bolts on a 1992 Pontiac grand prix?
t-60
What wrench do you need for the caliper mounting bolts on a 1996 mercury villager and what are the rubber collars for?
You need a 'Star' or 'Torx' wrench. The rubber collars keep dirt of the caliper mounting bolts so the caliper can 'float'
What size is caliper bolts on 95 Chevy Blazer?
A 3/8" Allen wrench is used to r&r the caliper bolts.
What size of wrench is needed to remove 2003 Silverado front caliper bolts?
the caliper bracket bolts use 18 mm wrench on a 03 1/2 ton 4x4
What is the size of the caliper Allen bolts on a 95 Chevy Silverado?
The Allen wrench size for the front caliper slide pin bolts is 3/8".
How do you replace brake disc on a 2000 Pontiac sunfire?
Lift car, remove wheel, remove caliper & caliper bracket (bolts in back near strut). Give the rotor a wack with a hammer if it's stuck on the hub and remove it. Reverse to install.
What size wrench is needed to remove the caliper bolts on the front brakes of a 1995 Chevy Suburban?
the caliper bolts require a 3/8" Allen wrench. You can buy these as a socket at just about any parts store.
What size Allen wrench for 2002 dodge Dakota caliper bolts?
7mm.
What size Allen wrench on 1999 dodge caliper bolts?
7 mm
What kind of wrench is needed to remove the front caliper bolts on a 2001 ford focus?
Metric Allen wrench.
