0
What else can I help you with?
What is a clutch wrench?
A clutch wrench is a mechanical tool used to hold a clutch in place during installation. This holds the clutch still and does not allow it to move.
What is the special tool needed to change the fan clutch?
I used a 12 inch crescent wrench and a 13mm wrench on the water pump pulley bolts. if it wont budge, tap the fan clutch nut with a hammer, sometimes they are hard to get off
What size wrench is needed to remove a caliper from a 2000 Chevrolet Silverado?
You need a 3/8 Allen key.
What tools needed to change front brake pads 1991 Chevrolet caprice?
To change the brake pads on a 1991 Chevrolet Caprice, you will need some tools. You're going to need a c-clamp, a hex key or Allen wrench to remove the calipers, and a wrench to bleed the lines.
How does change clutch disk and cylinder?
try a wrench
What special tools are needed for removal of water pump on dodge 2001 truck?
Just a 36mm wrench and a holding devise (spanner) to remove the fan clutch.
How do you hold the water pump shaft to loosen the fan clutch nut for 2000 jeep wrangler 4.0l 6-cylinder?
Use a fan clutch wrench, hit it with a hammer(top right side of wrench) counter clock wise, or open end wrench, same process, or use a air hammer on fan clutch nut(hitting it counter-clock-wise) Use a fan clutch wrench, hit it with a hammer(top right side of wrench) counter clock wise, or open end wrench, same process, or use a air hammer on fan clutch nut(hitting it counter-clock-wise)
How do you change a vw polo clutch cable?
Changing a VW Polo clutch cable requires exposing both ends of the cable. An open ended wrench will be needed to loosed the existing cable. After replacing the cable, be sure to bleed the line to prevent failure.
How do you change fan clutch on 3500 ram 5.9L does it take a fan clutch tool?
Yes it takes a 36mm wrench and a holder for the pulley to remove the fan clutch,
How do you loosen a clutch bleeder screw on a 1999 Honda Accord?
With a boxed end wrench or socket, never with an open end wrench.
What size allen wrench is needed for bike pedals?
The size of the allen wrench needed for bike pedals is typically 6mm.
What size wrench fits the caliper pins on a 1986 Chevrolet Nova?
10mm
