To lift a 95 Geo Tracker by 2 inches, you can use aftermarket coil spring spacers or upgraded coil springs specifically designed for lift applications. Additionally, you might consider using lift kits that include new springs or spacers to achieve the desired height. Be sure to also check for compatibility with your vehicle and consider adjusting other components, like shocks, to maintain proper suspension geometry.
yes,all tracker use the same parts
The 1997 Geo Tracker uses Beck Arnley 252-1501C Blue 50/50 Premix coolant. The Geo Tracker has a coolant capacity of 5.5 quarts.
No
to tow a 1992 Geo Tracker you must either disconnect the drive shaft or use a tow dolly and tow it backwards or you will damage the transmission
Not sure what you mean but Geo's are made by Suzuki and use Suzuki engines.
dot 3 is the brake fluid to use in all trackers
The Geo. Tracker OIl Cap. is 41/2 Qts. of oil--unless you use a larger oil filter such as a Fram ph3400 then it becomes 5 Qts. Al S.
To remove the front seats in a 1990 Geo Tracker, first, slide the seat all the way forward to access the rear bolts. Use a socket wrench to remove the bolts securing the seat to the floor. After removing the rear bolts, slide the seat back to access and remove the front bolts. Finally, disconnect any electrical connectors, if applicable, and lift the seat out of the vehicle.
You hold the "rcl" button in and use the "seek/scan button for hours and minutes.
On our 1993 Geo Tracker, we have the stock 15 inch rims on it and we just put 235 70 r 15's on it and they work great, don't rub anywhere, and i think that's probably the biggest you'll be puttin on a tracker unless you raise it.
Use the RockAuto.com catalog to compare part numbers for parts that fit the '91 Geo Tracker with part numbers for your parts car. If the part numbers are the same then the parts are the same and interchangeable.
there is only to types of fluid synthetic and conventional. they will both work