0
To change the alternator in a Chevrolet Lumina, you will typically need a socket set, including a ratchet and various-sized sockets, especially a 10mm and 13mm socket for the bolts. Additionally, a wrench set may be helpful for accessing tight spaces, and a belt tensioner tool can assist with loosening the serpentine belt. It's also advisable to have a multimeter to test the new alternator's output once installed.
What else can I help you with?
How do you change an alternator in a 1992 Chevy Lumina?
there is no alternator on the 1992 Lumina its all electric, so there is no need for one.
How do you change the thermostat on a 2000 Chevy Lumina?
do i need to change the manifold when replacing thermostat
What tools do you use to change an alternator on a 93 Saturn SL1?
You'll need some metric sockets. 3/8" drive will be fine. Maybe a small extension and the ratchet. Not to many tools involved.
How can i change fre-on on a1997 Chevy Lumina?
There is no need to ever change the refrigerant which is R134 and not Freon R12.
How do you replace the alternator belt on an infiniti J30?
Is the timing belt on a j30 infinity run the alternator
How do you repalce an alternator?
I need a step-by-step how to change, remove and replace an alternator in an 1996 Nissan maxima
How do you replace an alternator on a 1991 Chevy Lumina?
If it is just like a 1990 Lumina with a 3.1 engine, the alternator sits on top toward the back... There are 3 bolts that hold it on the bracket... DO NOT be fooled... 2 are simple to remove... the 3rd is underneath toward the back... nearly impossible... The simplest way to change it (after taking the belt off of course) is to take the bracket off off the engine... 3 or 4 bolts... Then remove the alternator from the bracket... You will need to remove the hot wire held to the alternator, but be sure to 1st remove the negative wire from the battery or you could shock the @#$% out out of yourself... Hope this helps...
How do you change an alternator in a 1999 Ford Mustang?
First to change the alternator: *Take out the oil carbronater *Then clean out the exhaust pipe *Take the alternator and clean what is dirty, then you don't need to change it, because now it's clean!
How do you replace the alternator on a 1999 Chevy Blazer S-10 4wd?
the alternator will be located close to the top of the motor, you will need to loosen the tensioner pulley and remove the serpentine belt, disconnect the elictrical connections at the alternator and remove the alternator mounting bolts. then just lift the alternator out... as far as tools you will need a basic set of sockets and a screwdriver.
What tools do i need to chage the alternator on a 1997 Oldsmobile silhoutte?
You will need a set of SAE or standard wrenches and SAE sockets and some muscle.
What tools do you need to change radiator?
wrench
What tools do you need to replace an alternator on a 1996 Toyota Camry?
Wrenches: 10 mm, 12mm and 14 mm.
